Research Output 1969 2020

Filter
Conference contribution
2019
5 Downloads (Pure)

Added value of regular in-service visual inspection to the fatigue reliability of structural details in steel bridges

Hashemi, S., Maljaars, J. & Snijder, B., 2019, 5th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures – SMAR 2019: Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Steel bridges
Inspection
Fatigue of materials
Crack detection
Steel structures

Boundary conditions effects on the crack growth mechanism under cycling bending

Pucillo, G. P., Leonetti, D. & Esposito, L., 2019, 2019 Joint Rail Conference, JRC 2019. American Society of Mechanical Engineers, 6 p. JRC2019-1274

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Crack propagation
Boundary conditions
Cracks
Stress intensity factors
Aspect ratio

Evaluation of clamping force in hot-driven rivets of the Botlekbrug

Leonetti, D., Maljaars, J. & Snijder, B., 2019, Proceedings of the Belgian-Dutch IABSE Young Engineers Colloquium 2019, YEC 2019. De Pauw, B., Leonetti, D., Snijder, H. H. & De Pauw, B. (eds.). Belgian and Dutch National Groups of IABSE, p. 76-77 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Rivets
Fatigue of materials
Bolted joints
Steel structures
Stress concentration

Fatigue assessment of an existing orthotropic steel deck to comply with future traffic intensity

Nagy, W., De Backer, H., Thierens, G., Blontrock, H., Van Bogaert, P., Reynaert, K. & Maljaars, J., 1 Jan 2019, 20th Congress of IABSE, New York City 2019: The Evolving Metropolis - Report. International Association for Bridge and Structural Engineering, p. 712-718 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Fatigue of materials
Steel
Fatigue damage
Axles
Load limits

Probabilistic approach to evaluate fatigue safety status in steel railway bridges

Hashemi, B., Maljaars, J. & Snijder, B., 2019, Proceedings of the Belgian-Dutch IABSE Young Engineers Colloquium 2019, YEC 2019. De Pauw, B., Leonetti, D., Snijder, H. H. & De Pauw, B. (eds.). Belgian and Dutch National Groups of IABSE, p. 36-37 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Steel bridges
Sensitivity analysis
Fatigue of materials
Steel

Rainwater ponding on roof structures with interaction between main girders and purlins

Snijder, B. & Wijte, S., 2019, 20th Congress of IABSE New York City 2019: The Evolving Metropolis - Report. Zurich: International Association for Bridge and Structural Engineering, p. 150-157 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Ponding
Beams and girders
Roofs
Rain
Climate change

Stability interaction effects in 3D steel frames: a case study

Snijder, B., Titulaer, L. H. J. D., Teeuwen, P. A. & Hofmeyer, H., 2019, Proceedings of the International Colloquia on Stability and Ductility of Steel Structures (SDSS 2019), September 11-13, 2019, Prague, Czech Republic. Wald, F. & Jandera, M. (eds.). Boca Raton: CRC Press Taylor & Francis Group, p. 1025-1033 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Finite element method
Steel
Stiffness
Computer simulation
Experiments

The influence of material temperature on the in-print strength and stability of a 3D print mortar

Bos, F., Wolfs, R., Hermens, L. & Salet, T., 22 Aug 2019, Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications . Zingoni, A. (ed.). CRC Press/Balkema, p. 425-430 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2018
2 Citations (Scopus)
1 Downloads (Pure)

3D printed concrete bridge

Salet, T. A. M., Ahmed, Z. Y., Bos, F. P. & Laagland, H. L. M., 1 Jan 2018, Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018). p. 2-9 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
Concrete bridges
Bicycles
Testing
Reinforcement
Concretes

A new model for fatigue load sequence effects in offshore wind turbine substructures and its implications for design life

Dragt, R. C., Hengeveld, S. T. & Maljaars, J., 1 Jan 2018, Proceedings of the 28th International Ocean and Polar Engineering Conference, ISOPE 2018. International Society of Offshore and Polar Engineers, p. 265-272 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Offshore wind turbines
Fatigue of materials
Fatigue crack propagation
Extrapolation
Experiments

Asymmetric high performance SIPS panels for loadbearing walls

Jorissen, A. J. M., van Rie, J. L. G., van Roestel, R. P. & Hofmeyer, H., 2018, Proceedings of 2018 World Conference on Timber Engineering WCTE 2018. Seoul: National Institute of Forest Science, 8 p. S163

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Bearings (structural)
Stress concentration
Elastic moduli
Stiffness
Industry
20 Downloads (Pure)

Bond slip behaviour of deep mounted carbon fibre reinforced polymer strops confined with a ductile adhesive in clay brick masonry

Türkmen, Ö. S., Wijte, S. N. M. & Vermeltfoort, A. T., 14 Feb 2018, Prtoceedings of the 10th Australasian Masonry Conference : Masonry Today and Tomorrow. Masia, M., Alternam, D., Totoev, Y. & Page, A. (eds.). p. 672-686

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Brick
Carbon fibers
Adhesives
Clay
Polymers
17 Downloads (Pure)

Climate-induced damage in historical cabinet doors

Luimes, R. A., Suiker, A. S. J., Jorissen, A. J. M., Schellen, H. L. & van Duin, P. H. J. C., 1 Jan 2018, World Conference on Timber Engineering 2018. p. 1-2 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
climate
Quercus
damage
crack
moisture

Evaluation of the in-plane shear strength of a combined retrofit system for masonry walls

Türkmen, Ö. S., De Vries, B. T., Wijte, S. N. M. & Vermeltfoort, A. T., Jul 2018, Tenth International Masonry Conference. p. 1953-1962 10 p. S12 426

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Shear strength
Carbon fibers
Polymers
Retrofitting
Brick
1 Citation (Scopus)
1 Downloads (Pure)

Large scale testing of digitally fabricated concrete (DFC) elements

Bos, F., Wolfs, R., Ahmed, Z. & Salet, T., 31 Aug 2018, First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018. Wangler, T. & Flatt, R. J. (eds.). Berlin: Springer, p. 129-147 19 p. (RILEM Bookseries; vol. 19).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Concretes
Testing
Bearings (structural)
Concrete construction
Printing
98 Downloads (Pure)

Partial factors for fatigue loads in the Eurocode system for road bridge design

Hashemi, S. B., Maljaars, J. & Snijder, H. H., 15 Jun 2018, Safety and Reliability - Safe Societies in a Changing World: Proceedings of ESREL 2018. Haugen, S., Barros, A., Van Gulijk, C., Kongsvik, T. & Vinnem, J. E. (eds.). 1st ed. London: Taylor and Francis Ltd., p. 2339-2345 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Fatigue of materials
Weigh-in-motion (WIM)
Steel bridges
Fatigue damage
Reliability analysis
606 Downloads (Pure)

Repair, strengthening and upgrading of steel bridges in The Netherlands

Snijder, H. H. & Hesselink, B. H., 2018, Engineering the Future : Proceedings of the 39th IABSE Symposium, 21-23 September 2017, Vancouver, Canada . s.l.: International Association for Bridge and Structural Engineering, p. 1177-1184 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Steel bridges
Repair
Fatigue damage
Fatigue of materials
47 Downloads (Pure)

Representativeness of compressed flange behaviour for trapezoidal steel sheeting under combined web crippling and bending

Hofmeyer, H., Vervoort, E. M. C., Snijder, H. H. & Maljaars, J., 2018, Proceedings Eight International Conference on Thin-Walled Structures ICTWS 2018, July 24-27, 2018, Lisbon, Portugal. 20 p. 22

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
1 Citation (Scopus)

Static-cyclic in-plane tests on clay brick masonry retrofitted with a single sided fabric-reinforced cementitious matrix layer, deep mounted CFRP strips and flexible anchor connection

Türkmen, Ö. S., De Vries, B. T., Wijte, S. N. M. & Vermeltfoort, A. T., Jul 2018, Tenth International Masonry Conference. p. 1668-1683 16 p. S09 647

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Brick
Anchors
Carbon fibers
Reinforcement
Polymers

The development of a methodology to understand climate-induced damage in decorated oak wood panels

Ekelund, S. E., Luimes, R. A., Gauvin, C. A. F., van Duin, P. H. J. C., Jorissen, A. J. M., Ankersmit, H. A., Suiker, A. S. J., Groves, R. M. & Schellen, H. L., 2018, ICOM-CC 18th Triennial Conference, Copenhagen, Denmark. p. 1-9 9 p. 1507

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Museums
Wood
Conservation
Specifications
Testing
2017
8 Citations (Scopus)
19 Downloads (Pure)

3D concrete printing – a structural engineering perspective

Salet, T. A. M., Bos, F. P., Wolfs, R. J. M. & Ahmed, Z. Y., 2017, High Tech Concrete: where technology and engineering meet: Proceedings of the 2017 fib Symposium, held in Maastricht, The Netherlands, June 12–14, 2017. Hordijk, D. A. & Luković, M. (eds.). Cham : Springer, p. xliii-lvii 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Structural design
Printing
Concretes
Geometry
Structural analysis
17 Citations (Scopus)
7 Downloads (Pure)

3D printing concrete with reinforcement

Bos, F. P., Ahmed, Z. Y., Wolfs, R. J. M. & Salet, T. A. M., 2017, High Tech Concrete: where technology and engineering meet. Hordijk, D. A. & Luković, M. (eds.). Cham: Springer, p. 2484-2493 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Printing
Reinforcement
Concretes
Cables
3D printers
37 Downloads (Pure)

Analytical modelling of the out-of-plane behavior of CFRP and ductile adhesive reinforced clay brick masonry walls

Wijte, S. N. M., Türkmen, Ö. S., Vermeltfoort, A. T. & Martens, D. R. W., 4 Jun 2017, Proceedings 13th Canadian Masonry Symposium. 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Brick
Carbon fibers
Adhesives
Clay
Polymers
2 Citations (Scopus)
1 Downloads (Pure)

Approach to include load sequence effects in the design of an offshore wind turbine substructure

Dragt, R. C., Allaix, D., Maljaars, J., Tuitman, J. T., Salman, Y. & Otheguy, M. E., 2017, Proceedings 27th International Ocean and Polar Engineering Conference. p. 312-319 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

158 Downloads (Pure)

Arching effect in laterally loaded urm walls

Martens, D. R. W. & Vermeltfoort, A. T., Jun 2017, Proceedings 13th Canadian Masonry Symposium. p. 1-12 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Bearing capacity
Compressive strength
Loads (forces)
Arches
Analytical models
5 Citations (Scopus)
4 Downloads (Pure)

A real-time height measurement and feedback system for 3D concrete printing

Wolfs, R. J. M., Bos, F. P., van Strien, E. C. F. & Salet, T. A. M., 2017, High Tech Concrete: where technology and engineering meet: Proceedings of the 2017 fib Symposium, held in Maastricht, The Netherlands, June 12–14, 2017. Hordijk, D. A. & Luković, M. (eds.). Cham: Springer, p. 2474-2483

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Time measurement
Printing
Concretes
Feedback
3D printers
249 Downloads (Pure)

Bending-shear interaction of steel I-shaped cross-sections: statistical evaluation

Dekker, R. W. A., Snijder, H. H. & Maljaars, J., 2017, 8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark. p. 3699–3708 10 p. (CE/Papers; vol. 1, no. 2-3).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Strain hardening
Steel
Yield stress
Numerical models
Statistical methods
112 Downloads (Pure)

Compatibility of S-N and crack growth curves in the fatigue reliability assessment of a welded steel joint

Hashemi, S. B., Maljaars, J., Leonetti, D. & Snijder, H. H., 6 Sep 2017, Procedia Structural Integrity. Vol. 5. p. 959-966 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Crack propagation
Fatigue of materials
Steel
Miners
Reliability analysis
59 Downloads (Pure)

Developments in matrials codes and applications of steel structures

Snijder, H. H., 2017, Stahlbau, Holzbau und Verbundbau – Festschrift zum 60. Geburtstag von Univ.-Prof. Dr.-Ing. Ulrike Kuhlmann. Stuttgart: Institut für Konstruktion und Entwurf, Universität Stuttgart, Wilhelm Ernst & Sohn, p. 164-175 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Steel structures
High strength steel
1 Citation (Scopus)

Experiments to determine the out-of-plane behavior of CFRP and ductile adhesive reinforced clay brick masonry walls

Türkmen, Ö. S., Wijte, S. N. M., Vermeltfoort, A. T. & Martens, D. R. W., 4 Jun 2017, Proceedings 13th Canadian Masonry Symposium. p. 1-11 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Brick
Carbon fibers
Adhesives
Clay
Polymers
2 Citations (Scopus)
47 Downloads (Pure)

Expert judgment in life-cycle degradation and maintenance modelling for steel bridges

Kosgodagan, A., Morales-Nápoles, O., Maljaars, J. & Courage, W. M. G., 2017, Life-Cycle of Engineering Systems: Emphasis on Sustainable Civil Infrastructure - 5th International Symposium on Life-Cycle Engineering, IALCCE 2016, 16-19 October 2016, Delft, The Netherlands. s.l.: CRC Press/Balkema, p. 2130-2137 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Steel bridges
Bayesian networks
Markov processes
Life cycle
Degradation

Extended design method for in-plane stability of haunched sway portal frames

van Hove, B. W. E. M., Snijder, H. H., Hofmeyer, H. & Altinga, N., 2017, 8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark. p. 1344-1352 (CE/Papers; vol. 1, no. 2-3).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Stiffness
Buckling
Amplification
Geometry
Steel

Fatigue damage evaluation using S-N curves obtained by different data fitting methods

Leonetti, D., Hashemi, S. B., Allaix, D. & Maljaars, J., 2017, Engineering the Future : 39th IABSE Symposium, 19-23 September 2017, Vancouver, British Columbia. p. 2551-2558

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Fatigue damage
Fatigue of materials
Miners
Fracture mechanics
Maximum likelihood
364 Downloads (Pure)

Net cross-section failure of steel plates at bolt holes: numerical work and statistical assessment of design rules

Snijder, H. H., Dekker, R. W. A. & Teeuwen, P. A., 2017, 8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark. p. 3679–3688 10 p. (CE/Papers; vol. 1, no. 2-3).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Bolts
Steel
Strain hardening
Numerical models
2 Citations (Scopus)
7 Downloads (Pure)

Optimising 3D printed concrete structures using topology optimisation

Martens, P., Mathot, M., Bos, F. P. & Coenders, J., 2017, High Tech Concrete: where technology and engineering meet: Proceedings of the 2017 fib Symposium, held in Maastricht, The Netherlands, June 12–14, 2017. Hordijk, D. A. & Luković, M. (eds.). Cham: Springer, p. 301-309 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Shape optimization
Concrete construction
Printing
3D printers
Concretes

Optimising 3D printed concrete structures using topology optimisation

Martens, P. A., Mathot, M., Coenders, J. L., Bos, F. P. & Rots, J. G., Sep 2017, Interfaces: Architecture.Engineering.Science : Proceedings of the IASS Annual Symposium 2017, 25-28 September 2017, Hamburg, Germany. p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

42 Downloads (Pure)

Preliminary tests on the lateral load-bearing capacity of slender masonry walls

Vermeltfoort, A. T. & Martens, D. R. W., Jun 2017, Proceedings 13th Canadian Masonry Symposium, July 4-7, 2017, Halifax, Canada. p. 1-12 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Axial loads
Bearing capacity
Loads (forces)
Bending tests
Natural gas
1000 Downloads (Pure)

Recent developments regarding the next version of Eurocode 3 Part 1-1 on steel structures

Snijder, H. H., Nov 2017, XI Congresso de Constução Metálica e Mista (XI Conference on Steel and Composite Construction). Simões da Silva, L., Vila Real, P., Piloto, P. & Martins, J. P. (eds.). Coimbra, Portugal: CMM Associação Portuguesa de Construção Metálica e Mista, p. 514-538 22 p. (Ce/papers; vol. 1, no. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Steel structures
1 Downloads (Pure)

Reliability of non-destructive testing methods by detecting the presence of reinforcement in existing concrete structures

Selek, I., Wijte, S. N. M. & Swinkels, M., 12 Jun 2017, High Tech Concrete: where technology and engineering meet: Proceedings of the 2017 fib Symposium, held in Maastricht, The Netherlands, June 12-14, 2017. Hordijk, D. A. & Luković, M. (eds.). Springer, p. 1858-1866

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Nondestructive examination
Concrete construction
Reinforcement
Concretes
Radar
111 Downloads (Pure)

Safety assessment across modes driven by plasticity, stability and fracture

Simoes da Silva, L., Tankova, T., Marques, L., Kuhlmann, U., Kleiner, A., Spiegler, J., Snijder, H. H., Dekker, R. W. A., Taras, A. & Popa, N., 2017, 8th European Conference on Steel and Composite Structures (EUROSTEEL 2017), September 13-15, 2017, Copenhagen, Denmark. p. 3689–3698 10 p. (CE/Papers; vol. 1, no. 2-3).

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

File
Plasticity
Steel structures
Failure modes
Steel
Ductility
2016
2 Citations (Scopus)
2 Downloads (Pure)

Aluminium in Infrastructures

Maljaars, J., 5 Oct 2016, ICSOBA 2016, Quebec City, Canada, 3-6 October, 2016. ICSOBA, p. 1-11 11 p. KN02

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Aluminum alloys
Aluminum
Railings
Footbridges
Landing

Bed joint reinforcement and the load bearing capacity of masonry beams

Vermeltfoort, A. T., 1 Jan 2016, Brick and Block Masonry: Trends, Innovations and Challenges - Proceedings of the 16th International Brick and Block Masonry Conference, IBMAC 2016. Modena, C., da Porto, F. & Valluzzi, M. R. (eds.). CRC Press/Balkema, p. 2353-2360 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Bearing capacity
Loads (forces)
Reinforcement
Struts
Cracks
70 Downloads (Pure)

Bed joint reinforcement and the shear capacity of masonry beams

Vermeltfoort, A. T., Jun 2016, 16th International Brick Block masonry conference, Padova, Italy. p. 1-10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Reinforcement
Struts
Cracks

Climate4Wood: climate effects on decorated wooden panels

Schellen, H. L., van Duin, P. H. J. C., Ekelund, S. E., Luimes, R. A., Gauvin, C. A. F., Jorissen, A. J. M., Groves, R. M., Ankersmit, H. A. & Suiker, A. S. J., 17 Nov 2016, NWO Science4Arts symposium, Amsterdam, The Netherlands. p. 13-17 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

Museums
Specifications
Climate models
Painting
Costs
1 Citation (Scopus)

Compression and shear properties of masonry cut from walls, three to ninety-five years old, compared with laboratory made masonry

Vermeltfoort, A. T. & Martens, D. R. W., Jun 2016, Proceedings of the 16th International brick block masonry conference, Padova, Italy. p. 1-10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

masonry
compression
compressive strength
shear strength
stiffness
3 Citations (Scopus)
1 Downloads (Pure)

Compressive strength of ice and cellulose-ice composite

Cruz, P. J. S. & Belis, J. L. I. F., 2016, Structures and Architecture : Beyond their Limits. Cruz, P. J. S. (ed.). Boca Raton: Taylor and Francis Ltd., p. 348-355 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Compressive strength
Ice
Cellulose
Arch bridges
Composite materials
10 Downloads (Pure)

Design considerations due to scale effects in 3D concrete printing

Ahmed, Z. Y., Bos, F. P., Wolfs, R. J. M. & Salet, T. A. M., Nov 2016, Proceedings of 8th International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2016), London, United Kingdom. p. 1-10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

2 Citations (Scopus)
117 Downloads (Pure)

Design imperfections for steel beam lateral torsional buckling

Snijder, H. H., van der Aa, R. P., Hofmeyer, H. & van Hove, B. W. E. M., 2016, Proceedings of the International Colloquium on Stability and Ductility of Steel Structures. Dubina, D. & Ungureanu, V. (eds.). Timisoara: Wiley Ernst & Sohn, p. 549-556 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Buckling
Torsional stress
Defects
Steel

Drukeigenschappen van Guadua Angustifolia nader geanalyseerd

Louppen, T. & Jorissen, A. J. M., Oct 2016, Construeren met Hout. Jorissen, A. J. M. & Leijten, A. J. M. (eds.). Eindhoven: Technische Universiteit Eindhoven, p. 136-155

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademic

1 Citation (Scopus)

Experimental tests and numerical modelling of timber joints with tube fasteners

van Bakel, R. H. B., Rinaldin, G., Leijten, A. J. M. & Fragiacomo, M., 22 Aug 2016, Proceedings of the World Conference on Timber Engineering (WCTE 2016), 22-25 August 2016, Vienna, Austria. Eberhardsteiner, J., Winter, W., Fadai, A. & Pöll, M. (eds.). Vienna: Vienna University of Technology, p. 1-8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Fasteners
Timber
Veneers
Potential energy
Dynamic analysis