Research Output 1969 2020

2020
1 Citation (Scopus)
Open Access
File
masonry
bricks
Brick
carbon fibers
clays

Onderzoeksmiddag construeren met hout

Jorissen, A. J. M., 5 Jan 2020, (Accepted/In press) Eindhoven: Technische Universiteit Eindhoven.

Research output: Book/ReportBookAcademic

2019

About ECCS and its technical committee TC8 on the stability of steel structures

Snijder, H. H. B. & Lindner, J., 1 Nov 2019, In : Steel Construction : Design and Research. 12, 4, p. 372-376 5 p.

Research output: Contribution to journalArticleProfessional

Steel structures
4 Citations (Scopus)
25 Downloads (Pure)

A cohesive XFEM model for simulating fatigue crack growth under mixed-mode loading and overloading

Dekker, R., van der Meer, F. P., Maljaars, J. & Sluys, L. J., 8 Jun 2019, In : International Journal for Numerical Methods in Engineering. 118, 10, p. 561-577 17 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Fatigue Crack Growth
Mixed Mode
Fatigue crack propagation
Adaptive Meshing
Cohesive Zone Model
5 Downloads (Pure)

Added value of regular in-service visual inspection to the fatigue reliability of structural details in steel bridges

Hashemi, S., Maljaars, J. & Snijder, B., 2019, 5th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures – SMAR 2019: Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Steel bridges
Inspection
Fatigue of materials
Crack detection
Steel structures
10 Citations (Scopus)
32 Downloads (Pure)

An approach to develop printable strain hardening cementitious composites

Chaves Figueiredo, S., Romero Rodríguez, C., Ahmed, Z., Bos, D. H., Xu, Y., Salet, T., Çopuroglu, O., Schlangen, E. & Bos, F., 5 May 2019, In : Materials & Design. 169, 17 p., 107651.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Strain hardening
Rheology
Yield stress
Composite materials
Printing
8 Downloads (Pure)

Bending moment - shear force interaction of rolled I-shaped steel sections

Dekker, R. W. A., 9 Jan 2019, Eindhoven: Technische Universiteit Eindhoven. 249 p.

Research output: ThesisPhd Thesis 1 (Research TU/e / Graduation TU/e)

Open Access
File

Boundary conditions effects on the crack growth mechanism under cycling bending

Pucillo, G. P., Leonetti, D. & Esposito, L., 2019, 2019 Joint Rail Conference, JRC 2019. American Society of Mechanical Engineers, 6 p. JRC2019-1274

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Crack propagation
Boundary conditions
Cracks
Stress intensity factors
Aspect ratio
251 Downloads (Pure)

Climate-induced damage in oak museum objects

Luimes, R. A., 17 Sep 2019, Eindhoven: Technische Universiteit Eindhoven. 131 p.

Research output: ThesisPhd Thesis 1 (Research TU/e / Graduation TU/e)

Open Access
File
Oak
Art Objects
Climate
Damage
9 Downloads (Pure)
Open Access
File
Cracking
Plasticity
Fracture toughness
Wood
Cells

Constructiesystemen voor hallen

Translated title of the contribution: Structural systems for hallsSnijder, H. H., 2019, Hallen: kenmerken en constructiesystemen van stalen hallen en het ontwerp van een éénbeukige geschoorde hal volgens Eurocode 3. van Eldik, C. H. (ed.). Zoetermeer: Bouwen met staal, 28 p.

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

2 Citations (Scopus)
5 Downloads (Pure)

Digital concrete: a review

Wangler, T., Roussel, N., Bos, F., Salet, T. & Flatt, R., Sep 2019, In : Cement and Concrete Research. 123, 17 p., 105780.

Research output: Contribution to journalArticleAcademicpeer-review

Concretes
Fabrication
Rheology
Hydration
Printing
5 Citations (Scopus)
116 Downloads (Pure)

Ductility of 3D printed concrete reinforced with short straight steel fibers

Bos, F. P., Bosco, E. & Salet, T. A. M., 3 Apr 2019, In : Virtual and Physical Prototyping. 14, 2, p. 160-174 15 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Ductility
Steel fibers
Reinforced Concrete
Straight
Reinforced concrete

Evaluation of clamping force in hot-driven rivets of the Botlekbrug

Leonetti, D., Maljaars, J. & Snijder, B., 2019, Proceedings of the Belgian-Dutch IABSE Young Engineers Colloquium 2019, YEC 2019. De Pauw, B., Leonetti, D., Snijder, H. H. & De Pauw, B. (eds.). Belgian and Dutch National Groups of IABSE, p. 76-77 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Rivets
Fatigue of materials
Bolted joints
Steel structures
Stress concentration
11 Downloads (Pure)

Evaluation of latent heat storage in mortars containing microencapsulated paraffin waxes – a selection of optimal composition and binders

Lucas, S. S. & Barroso de Aguiar, J. L., Sep 2019, In : Heat and Mass Transfer. 55, 9, p. 2429-2435

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Paraffin waxes
heat storage
Heat storage
phase change materials
waxes
381 Downloads (Pure)
Open Access
File
Concretes

Fatigue assessment of an existing orthotropic steel deck to comply with future traffic intensity

Nagy, W., De Backer, H., Thierens, G., Blontrock, H., Van Bogaert, P., Reynaert, K. & Maljaars, J., 1 Jan 2019, 20th Congress of IABSE, New York City 2019: The Evolving Metropolis - Report. International Association for Bridge and Structural Engineering, p. 712-718 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Fatigue of materials
Steel
Fatigue damage
Axles
Load limits

Fatigue life prediction of hot riveted double covered butt joints

Maljaars, J., Leonetti, D. & Maas, C., 1 Jul 2019, In : International Journal of Fatigue. 124, p. 99-112 14 p.

Research output: Contribution to journalArticleAcademicpeer-review

Fatigue Life Prediction
Fatigue Strength
Fatigue of materials
Rivets
Steel
1 Citation (Scopus)
1 Downloads (Pure)

Fatigue life prediction of hot-riveted shear connections using system reliability

Leonetti, D., Maljaars, J. & Snijder, H. H., 1 May 2019, In : Engineering Structures. 186, p. 471-483 13 p.

Research output: Contribution to journalArticleAcademicpeer-review

Fatigue of materials
Rivets
Riveting
Structural members
Steel structures
1 Downloads (Pure)

Glass is all around us!

Nielsen, J. H., Belis, J., Louter, C., Overend, M. & Schneider, J., 15 Jan 2019, In : Glass Structures & Engineering. 4, 1, p. 1-2 2 p.

Research output: Contribution to journalEditorialAcademicpeer-review

Open Access
8 Citations (Scopus)
1 Downloads (Pure)

Hardened properties of 3D printed concrete: the influence of process parameters on interlayer adhesion

Wolfs, R. J. M., Bos, F. P. & Salet, T. A. M., May 2019, In : Cement and Concrete Research. 119, p. 132-140 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

Adhesion
Concretes
Printing
Nozzles
3D printers

Masonry mechanical properties

Ghiassi, B., Vermeltfoort, A. T. & Lourenco, P. B., 2019, Numerical modeling of masonry and historical structures: from theory to application. Ghiassi, B. & Milani, G. (eds.). Elsevier, Woodhead publishing, p. 239-261 (Woodhead Publishing Series in Civil and Structural Engineering).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Equipment testing
Mortar
Materials properties
Mechanical properties
Computer simulation
4 Downloads (Pure)

Multi-scale modeling for façades under fire

Xu, Q., Hofmeyer, H. & Maljaars, J., 22 Oct 2019. 1 p.

Research output: Contribution to conferencePoster

Open Access
File

On the effects of unilateral boundary conditions on the crack growth rate under cycling bending loads

Pucillo, G. P., Esposito, L. & Leonetti, D., 1 Jul 2019, In : International Journal of Fatigue. 124, p. 245-252 8 p.

Research output: Contribution to journalArticleAcademicpeer-review

Crack Growth Rate
Notch
Cycling
Crack propagation
Boundary conditions

Probabilistic approach to evaluate fatigue safety status in steel railway bridges

Hashemi, B., Maljaars, J. & Snijder, B., 2019, Proceedings of the Belgian-Dutch IABSE Young Engineers Colloquium 2019, YEC 2019. De Pauw, B., Leonetti, D., Snijder, H. H. & De Pauw, B. (eds.). Belgian and Dutch National Groups of IABSE, p. 36-37 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Steel bridges
Sensitivity analysis
Fatigue of materials
Steel
98 Downloads (Pure)

Proceedings of the Belgian-Dutch IABSE Young Engineers Colloquium 2019: YEC2019

Snijder, H. H. (ed.), De Pauw, B. (ed.) & Leonetti, D. (ed.), 15 Mar 2019, Eindhoven: Technische Universiteit Eindhoven. 106 p.

Research output: Book/ReportBook editingAcademicpeer-review

Open Access
File
Engineers
Steel bridges
Bridge components
Fatigue of materials
Steel
1 Downloads (Pure)

Punching shear failure of welded rectangular hollow section joints in aluminium

Manders, W. W. J., Maljaars, J., Belin, B. & Lukić, M., 4 Jul 2019, In : Construction Métallique. 2019, 2, p. 119-142 22 p.

Research output: Contribution to journalArticleAcademicpeer-review

Punching
Aluminum
Steel structures
Failure modes
Welds

Rainwater ponding on roof structures with interaction between main girders and purlins

Snijder, B. & Wijte, S., 2019, 20th Congress of IABSE New York City 2019: The Evolving Metropolis - Report. Zurich: International Association for Bridge and Structural Engineering, p. 150-157 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Ponding
Beams and girders
Roofs
Rain
Climate change
1 Citation (Scopus)
1 Downloads (Pure)

Recent advances on yield stress and elasticity of fresh cement-based materials

Roussel, N., Bessaies-Bey, H., Kawashima, S., Marchon, D., Vasilic, K. & Wolfs, R. J. M., 1 Oct 2019, In : Cement and Concrete Research. 124, 11 p., 105798.

Research output: Contribution to journalReview articleAcademicpeer-review

Yield stress
Elasticity
Cements
Processing
Mechanical properties
18 Downloads (Pure)

Rekenregels beoordeling bestaande breedplaatvloeren: Resultaten onderzoek constructieve veiligheid in bestaande utiliteitsgebouwen

Wijte, S. & Dieteren, G. G. A., 1 Jun 2019, In : Cement. 2019, 4, p. 30-39 10 p.

Research output: Contribution to journalArticleProfessional

Open Access
File

Revision of EN 1993-1-11 – fatigue design rules for tension components

Annan, R., Bechtold, M., Friedrich, H., Maljaars, J., Misiek, T. & Paschen, M., 21 Jun 2019, In : Steel Construction : Design and Research. 12, 15 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
Fatigue of materials
Plastics
Defects
Brittle fracture
Fracture mechanics
Ligaments

Stabiliteit van hallen

Translated title of the contribution: Stability of hallsSnijder, H. H., 2019, Hallen: kenmerken en constructiesystemen van stalen hallen en het ontwerp van een éénbeukige geschoorde hal volgens Eurocode 3. van Eldik, C. H. (ed.). Zoetermeer: Bouwen met staal, 20 p.

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

Stability interaction effects in 3D steel frames: a case study

Snijder, B., Titulaer, L. H. J. D., Teeuwen, P. A. & Hofmeyer, H., 2019, Proceedings of the International Colloquia on Stability and Ductility of Steel Structures (SDSS 2019), September 11-13, 2019, Prague, Czech Republic. Wald, F. & Jandera, M. (eds.). Boca Raton: CRC Press Taylor & Francis Group, p. 1025-1033 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Finite element method
Steel
Stiffness
Computer simulation
Experiments
2 Citations (Scopus)
8 Downloads (Pure)

Structural failure during extrusion-based 3D printing processes

Wolfs, R. J. M. & Suiker, A. S. J., 1 Sep 2019, In : International Journal of Advanced Manufacturing Technology. 104, 1-4, p. 565-584 20 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Extrusion
Printing
Curing
Buckling
Finite element method

The influence of material temperature on the in-print strength and stability of a 3D print mortar

Bos, F., Wolfs, R., Hermens, L. & Salet, T., 22 Aug 2019, Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications . Zingoni, A. (ed.). CRC Press/Balkema, p. 425-430 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

3 Citations (Scopus)
3 Downloads (Pure)

Triaxial compression testing on early age concrete for numerical analysis of 3D concrete printing

Wolfs, R., Bos, F. & Salet, T., 1 Nov 2019, In : Cement & Concrete Composites. 104, 12 p., 103344.

Research output: Contribution to journalArticleAcademicpeer-review

Compression testing
Printing
Numerical analysis
Concretes
Buckling
138 Downloads (Pure)

Two-way coupled CFD fire and thermomechanical FE analyses of a self-supporting sandwich panel façade system

de Boer, J. G. G. M., Hofmeyer, H., Maljaars, J. & van Herpen, R., Apr 2019, In : Fire Safety Journal. 105, p. 154-168 15 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
charge flow devices
Computational fluid dynamics
Fires
screws
Insulation
2018
2 Citations (Scopus)
1 Downloads (Pure)

3D printed concrete bridge

Salet, T. A. M., Ahmed, Z. Y., Bos, F. P. & Laagland, H. L. M., 1 Jan 2018, Proceedings of the 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018). p. 2-9 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
Concrete bridges
Bicycles
Testing
Reinforcement
Concretes
5 Citations (Scopus)

3D Printing Concrete on temporary surfaces: The design and fabrication of a concrete shell structure

Borg Costanzi, C., Ahmed, Z. Y., Schipper, H. R., Bos, F. P., Knaack, U. & Wolfs, R. J. M., 1 Oct 2018, In : Automation in Construction. 94, p. 395-404 10 p.

Research output: Contribution to journalArticleAcademicpeer-review

Printing
Concretes
Fabrication
Adhesive pastes
Casting
3 Citations (Scopus)

A combined experimental and numerical examination of welding residual stresses

Rikken, M., Pijpers, R., Slot, H. & Maljaars, J., 1 Nov 2018, In : Journal of Materials Processing Technology. 261, p. 98-106 9 p.

Research output: Contribution to journalArticleAcademicpeer-review

Residual stresses
Welding
Superconducting transition temperature
Phase transitions
Dilatometers
2 Citations (Scopus)
1 Downloads (Pure)

A general bearing deformation model for timber : compression perpendicular to grain

Leijten, A. J. M., 2018, In : Construction and Building Materials. 165, p. 707-716

Research output: Contribution to journalArticleAcademicpeer-review

Bearings (structural)
Timber
Compaction
Wood
2 Citations (Scopus)
20 Downloads (Pure)

A method for studying climate-related changes in the condition of decorated wooden panels

Ekelund, S., van Duin, P. H. J. C., Jorissen, A. J. M., Ankersmit, B. & Groves, R. M., 2018, In : Studies in Conservation. 63, 2, p. 62-71 10 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Climate
Fluctuations
Rijksmuseum
Material Properties
Humidity

A new model for fatigue load sequence effects in offshore wind turbine substructures and its implications for design life

Dragt, R. C., Hengeveld, S. T. & Maljaars, J., 1 Jan 2018, Proceedings of the 28th International Ocean and Polar Engineering Conference, ISOPE 2018. International Society of Offshore and Polar Engineers, p. 265-272 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Offshore wind turbines
Fatigue of materials
Fatigue crack propagation
Extrapolation
Experiments

Asymmetric high performance SIPS panels for loadbearing walls

Jorissen, A. J. M., van Rie, J. L. G., van Roestel, R. P. & Hofmeyer, H., 2018, Proceedings of 2018 World Conference on Timber Engineering WCTE 2018. Seoul: National Institute of Forest Science, 8 p. S163

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Bearings (structural)
Stress concentration
Elastic moduli
Stiffness
Industry
20 Downloads (Pure)

Bond slip behaviour of deep mounted carbon fibre reinforced polymer strops confined with a ductile adhesive in clay brick masonry

Türkmen, Ö. S., Wijte, S. N. M. & Vermeltfoort, A. T., 14 Feb 2018, Prtoceedings of the 10th Australasian Masonry Conference : Masonry Today and Tomorrow. Masia, M., Alternam, D., Totoev, Y. & Page, A. (eds.). p. 672-686

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
Brick
Carbon fibers
Adhesives
Clay
Polymers

Challenging Glass 6: Conference on Architectural and Structural Applications of Glass

Louter, P. C. (ed.), Bos, F. P. (ed.), Belis, J. L. I. F. (ed.), Veer, F. A. (ed.) & Nijsse, R. (ed.), May 2018, Delft: TU Delft Open. 812 p.

Research output: Book/ReportBook editingAcademicpeer-review

Open Access
17 Downloads (Pure)

Climate-induced damage in historical cabinet doors

Luimes, R. A., Suiker, A. S. J., Jorissen, A. J. M., Schellen, H. L. & van Duin, P. H. J. C., 1 Jan 2018, World Conference on Timber Engineering 2018. p. 1-2 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionAcademicpeer-review

Open Access
File
climate
Quercus
damage
crack
moisture
12 Citations (Scopus)
1 Downloads (Pure)
Ultrasonic measurement
Quality control
Concretes
Compressive strength
Printing
22 Citations (Scopus)
965 Downloads (Pure)

Design of a 3D printed concrete bridge by testing

Salet, T. A. M., Ahmed, Z. Y., Bos, F. P. & Laagland, H. L. M., 1 Jun 2018, In : Virtual and Physical Prototyping. 13, 3, p. 222-236 15 p.

Research output: Contribution to journalArticleAcademicpeer-review

Open Access
File
Concrete bridges
Concretes
Testing
3D printers
Traffic Network