Department of Mechanical Engineering

Research Output

Filter
Poster
2008

Modeling martensitic transformation and its interaction with plasticity in metastable steels

Balmachnov, A., Kouznetsova, V. & Geers, M. G. D., 2008.

Research output: Contribution to conferencePosterAcademic

Open Access
File
70 Downloads (Pure)

Numerical modeling of diesel spray formation and combustion

Bekdemir, C., Somers, L. M. T. & Goey, de, L. P. H., 2008, p. 28-29.

Research output: Contribution to conferencePosterAcademic

3 Downloads (Pure)

Numerical modelling of ductile damage

Javani Joni, H., Peerlings, R. H. J. & Geers, M. G. D., 2008.

Research output: Contribution to conferencePosterAcademic

Open Access
File
60 Downloads (Pure)

Obtaining crystallinity under pressure

Balzano, L., Housmans, J. W. & Peters, G. W. M., 2008.

Research output: Contribution to conferencePosterAcademic

Open Access
File
35 Downloads (Pure)

On the performance of static mixers

Singh, M. K., Anderson, P. D. & Meijer, H. E. H., 2008.

Research output: Contribution to conferencePosterAcademic

Open Access
File
296 Downloads (Pure)

Pile-up studies in dislocation-based single crystal gradient plasticity

Hirschberger, C. B., Peerlings, R. H. J., Brekelmans, W. A. M., Peletier, M. A. & Geers, M. G. D., 2008.

Research output: Contribution to conferencePosterAcademic

Open Access
File
64 Downloads (Pure)

Prediction of yield and long-term failure of oriented polypropylene: kinetics and anisotropy

Erp, van, T. B., Reynolds, C. T., Dommelen, van, J. A. W. & Govaert, L. E., 2008.

Research output: Contribution to conferencePosterAcademic

Open Access
File
75 Downloads (Pure)

Simulation of cell deformation in a microfluidic cross-slot device

Du, G., Fang, Q. & Toonder, den, J. M. J., 2008.

Research output: Contribution to conferencePosterAcademic

Open Access
File
34 Downloads (Pure)

Simulation of microfluidic mixing using artificial cilia

Baltussen, M. G. H. M., Bos, F. M., Toonder, den, J. M. J. & Anderson, P. D., 2008.

Research output: Contribution to conferencePosterAcademic

Open Access
File
45 Downloads (Pure)

Simulation of mixing in intermeshing co-rotating twin-screw extruders

Sarhangi Fard, A., Anderson, P. D., Hulsen, M. A. & Meijer, H. E. H., 2008.

Research output: Contribution to conferencePosterAcademic

Open Access
File
89 Downloads (Pure)

Simulation of particle filled viscoelastic flows using grid deformation methods

Choi, Y. J., Hulsen, M. A. & Meijer, H. E. H., 2008.

Research output: Contribution to conferencePosterAcademic

Open Access
File
39 Downloads (Pure)

Skin orientation

Housmans, J. W., Balzano, L., Erp, van, T. B., Cavallo, D., Ma, Z. & Peters, G. W. M., 2008.

Research output: Contribution to conferencePosterAcademic

Open Access
File
32 Downloads (Pure)

Small coronary calcifications are not detectable by 64-slice CT

Giessen, van der, A. G., Gijsen, F. J. H., Wentzel, J. J., Walsum, van, T., Niessen, W. J., Feyter, de, P. J., Steen, van der, A. F. W. & Vosse, van de, F. N., 2008.

Research output: Contribution to conferencePosterAcademic

Open Access
File
94 Downloads (Pure)

Strain path dependency in BCC crystals

Yalcinkaya, T., Brekelmans, W. A. M. & Geers, M. G. D., 2008.

Research output: Contribution to conferencePosterAcademic

Open Access
File
39 Downloads (Pure)

Temperature effects on saturation of flow-enhanced nucleation

Steenbakkers, R. J. A., Peters, G. W. M., Baert, J. & Puyvelde, van, P. C. J., 2008.

Research output: Contribution to conferencePosterAcademic

Open Access
File
34 Downloads (Pure)

Two-scale thermal shock damage analysis in refractory ceramics

Ozdemir, I., Brekelmans, W. A. M. & Geers, M. G. D., 2008.

Research output: Contribution to conferencePosterAcademic

Open Access
File
47 Downloads (Pure)
2007

3D adaptive finite element simulation of fluid flow in twin-screw extruders

Sarhangi Fard, A., Anderson, P. D. & Meijer, H. E. H., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
46 Downloads (Pure)

A three dimensional modeling of ductile damage

Javani Joni, H., Peerlings, R. H. J. & Geers, M. G. D., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
38 Downloads (Pure)

Chaotic mixing induced by a magnetic chain in a rotating magnetic field

Kang, T. G., Hulsen, M. A., Anderson, P. D., Toonder, den, J. M. J. & Meijer, H. E. H., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
81 Citations (Scopus)
86 Downloads (Pure)

Computational homogenization for thermomechanical analysis of heterogeneous solids

Ozdemir, I., Brekelmans, W. A. M. & Geers, M. G. D., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
75 Downloads (Pure)

Confined flow of polymer blends

Tufano, C., Peters, G. W. M. & Meijer, H. E. H., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
123 Downloads (Pure)

Design and realization of a disposable bioreactor

Neerincx, P. E., Meijer, H. E. H. & Baaijens, F. P. T., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
48 Downloads (Pure)

Electrokinetic subsurface characterization

Schoemaker, F. C., Smeulders, D. M. J. & Slob, E. C., 2007, p. 76-77.

Research output: Contribution to conferencePosterAcademic

Open Access
File
58 Downloads (Pure)

Experimental characterization of interfe delamination in microsystems

Murthy Kolluri, N. V. V. R., Thissen, M. H. L., Hoefnagels, J. P. M., Dommelen, van, J. A. W. & Geers, M. G. D., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
73 Downloads (Pure)

First-order size effects in the mechanics of miniaturised components

Janssen, P. J. M., Hoefnagels, J. P. M., Keijser, de, T. H. & Geers, M. G. D., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
44 Downloads (Pure)

Forming the limits of damage predictions : microstructural modelling

Coenen, E. W. C., Kouznetsova, V. & Geers, M. G. D., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
60 Downloads (Pure)

Fusion of computed tomography and intravascular ultrasound to obtain human coronary geometry

Giessen, van der, A. G., Gijsen, F. J. H., Wentzel, J. J., Mollet, N. R., Steen, van der, A. F. W., Feyter, de, P. J. & Vosse, van de, F. N., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
39 Downloads (Pure)

Inertial effects in flows generated by artificial cilia

Baltussen, M. G. H. M., Anderson, P. D. & Toonder, den, J. M. J., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
65 Downloads (Pure)

Influences of the heterogeneities of the cerebral cortex for traumatic brain injury

Cloots, R. J. H., Dommelen, van, J. A. W. & Geers, M. G. D., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
37 Downloads (Pure)

Injection molding of iPP-DMDBS systems

Housmans, J. W., Peters, G. W. M. & Meijer, H. E. H., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
42 Downloads (Pure)

Integrated Fluid Transport in Micro Channels by Magnetic Particles

Derks, R. J. S., Frijns, A. J. H., Prins, M. W. J. & Dietzel, A. H., 2007, p. 1-2.

Research output: Contribution to conferencePosterAcademic

Intrinsic mechanical behavior of poly(lactic acids)

Söntjens, S. H. M., Willems, S. E. J., Engels, T. A. P., Govaert, L. E. & Meijer, H. E. H., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
113 Downloads (Pure)

Micro-mechanical model for paper

Thakkar, B. K., Peerlings, R. H. J. & Geers, M. G. D., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
56 Downloads (Pure)

Multi-relaxation time viscoplastic modeling of thermorheological simple materials

Breemen, van, L. C. A., Govaert, L. E. & Meijer, H. E. H., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
45 Downloads (Pure)

Optimization of mixing in rotated arc mixers (RAM)

Singh, M. K., Speetjens, M. F. M., Anderson, P. D. & Meijer, H. E. H., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
51 Downloads (Pure)

Pairing and group dynamics in parallel-wall channels

Janssen, P. J. A., Barron, M. D., Anderson, P. D., Blawzdziewicz, J., Loewenberg, M. & Wajnryb, E., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
41 Downloads (Pure)

Predicting failure of pressurized uPVC pipes

Visser, H. A., Engels, T. A. P. & Govaert, L. E., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
45 Downloads (Pure)

Predicting product performance limits for polymers

Engels, T. A. P., Govaert, L. E. & Meijer, H. E. H., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
36 Downloads (Pure)

Reducing flow-induced stresses in injection molding

Custodio, F., Anderson, P. D., Cunha, A. M. & Meijer, H. E. H., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
63 Downloads (Pure)

Saturated nucleation and the classification problem in flow-induced crystallization of polymers

Steenbakkers, R. J. A., Baert, J., Puyvelde, van, P. C. J., Peters, G. W. M. & Meijer, H. E. H., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
40 Downloads (Pure)

The effect of different constitutive models for brain tissue in a numerical head model

Hrapko, M., Dommelen, van, J. A. W., Peters, G. W. M. & Wismans, J. S. H. M., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
45 Downloads (Pure)

Towards enrichment of cohesive zone models for numerical simulation of interfacial delamination

Samimi, M., Hal, van, B. A. E., Peerlings, R. H. J., Dommelen, van, J. A. W. & Geers, M. G. D., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
38 Downloads (Pure)

Void evolution in sheet metal

Tasan, C. C., Hoefnagels, J. P. M. & Geers, M. G. D., 2007.

Research output: Contribution to conferencePosterAcademic

Open Access
File
55 Downloads (Pure)
2006

A numerical-experimental approach to characterize delamination in polymer coated steel

Bosch, van den, M. J., Schreurs, P. J. G. & Geers, M. G. D., 2006.

Research output: Contribution to conferencePosterAcademic

Open Access
File
39 Downloads (Pure)

BCC crystal plasticity for multi-stage loading processes

Yalcinkaya, T., Brekelmans, W. A. M. & Geers, M. G. D., 2006.

Research output: Contribution to conferencePosterAcademic

Open Access
File
45 Downloads (Pure)

Can we control the microstructure of injection moulded parts?

Custodio, F., Anderson, P. D., Peters, G. W. M., Cunha, A. M. & Meijer, H. E. H., 2006.

Research output: Contribution to conferencePosterAcademic

Open Access
File
43 Downloads (Pure)

Can we design optimal lab-on-a-chip micromixers?

Singh, M. K., Kang, T. G., Anderson, P. D. & Meijer, H. E. H., 2006.

Research output: Contribution to conferencePosterAcademic

Open Access
File
50 Downloads (Pure)

Chaotic advection using passive and actuated particles in a serpentine channel flow

Kang, T. G., Hulsen, M. A., Anderson, P. D., Toonder, den, J. M. J. & Meijer, H. E. H., 2006.

Research output: Contribution to conferencePosterAcademic

Open Access
File
43 Downloads (Pure)

Computational homogenization for heat conduction in heterogeneous solids

Ozdemir, I., Brekelmans, W. A. M. & Geers, M. G. D., 2006.

Research output: Contribution to conferencePosterAcademic

Open Access
File
122 Downloads (Pure)

Crack prevention in corrugated paper boards

Thakkar, B. K., Peerlings, R. H. J. & Geers, M. G. D., 2006.

Research output: Contribution to conferencePosterAcademic

Open Access
File
100 Downloads (Pure)