Department of Mechanical Engineering

Research Output 1957 2020

Filter
Chapter
2006
2 Downloads (Pure)

Smart materials

Broer, D. J., Houten, van, H. E. H., Ouwerkerk, M., Toonder, den, J. M. J., Sluis, van der, P., Klink, S. I., Hikmet, R. A. M. & Balkenende, R., 2006, True visions : the emergence of ambient intelligence. Aarts, E. H. L. & Encarnacao, J. L. (eds.). Berlin: Springer, p. 53-82

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

52 Downloads (Pure)

The key driver method

Heemels, W. P. M. H., Somers, L. J. A. M., Bosch, van den, P. F. A., Yuan, Z., Wijst, van der, B., Brand, van den, A. & Muller, G. J., 2006, Boderc: Model-based design of high-tech systems: a collaborative research project for multi-disciplinary design analysis of high-tech systems. Heemels, W. P. M. H. & Muller, G. J. (eds.). Eindhoven: Embedded Systems Institute, p. 27-42

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Open Access
File
Driver
Engineering
4 Citations (Scopus)
2 Downloads (Pure)

Time-varying delays in control

Cloosterman, M. B. G., Wouw, van de, N., Heemels, W. P. M. H. & Nijmeijer, H., 2006, Boderc: Model-based design of high-tech systems. Eindhoven: Embedded Systems Institute, p. 171-181 11 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

2 Downloads (Pure)

Tissue models

Bouten, C. V. C., 2006, Converging technologies: innovation patterns and impacts on society. Doorn, M. (ed.). STT Netherlands, Study Centre for Technology Trends, p. 118-132 (Stichting Toekomstbeeld der Techniek; vol. 71).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Human Body
Regenerative Medicine
Tissue Engineering
Bioengineering
Somatotypes
2007

Aerosol precipitation in small-scale biomass combustion units

Kemenade, van, H. P., 2007, Ash and aerosol related problems in biomass combustion and co-firing. Obernberger, I. & Brunner, T. (eds.). Graz: Graz University of Technology, p. 28-29

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

2 Downloads (Pure)

Analysis of premixed turbulent spherical flame kernels

Bastiaans, R. J. M., Swart, de, J. A. M., Oijen, van, J. A. & Goey, de, L. P. H., 2007, Complex effects in Large Eddy simulations. Kassinos, S. C., Langer, C. A., Iaccarino, G. & Moin, P. (eds.). Berlin: Springer, p. 371-383 (Lecture Notes in Computational Science and Engineering; vol. 56).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

flames
turbulence
chemistry
turbulence effects
burning rate

An evaluation of the accuracy of discontinuous finite elements in explicit dynamic calculations

Remmers, J. J. C., de Borst, R. & Needleman, A., 2007, IUTAM Symposium on Discretization Methods for Evolving Discontinuities. Combescure, A., de Borst, R. & Belytschko, T. (eds.). Dordrecht: Springer, p. 303-322 20 p. (IUTAM Bookseries; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

87 Downloads (Pure)

High-tech-systemen in beweging

Steinbuch, M., 2007, Dies natalis 2007 Technische Universiteit Eindhoven 27 april 2007 : where innovation starts. Eindhoven: Technische Universiteit Eindhoven, p. 19-25 (Dies natalis 2007 Technische Universiteit Eindhoven 27 april 2007 : where innovation starts, 2007).

Research output: Chapter in Book/Report/Conference proceedingChapterPopular

Open Access
File

Integration and test planning

Jong, de, I. S. M., Boumen, R., Mortel - Fronczak, van de, J. M. & Rooda, J. E., 2007, Tangram: Model-based integration and testing of complex high-tech systems. Tretmans, J. (ed.). Eindhoven: Embedded Systems Institute, p. 45-60

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Embedded systems
Planning
Costs
Industry
25 Downloads (Pure)

Integration and test planning patterns in different organizations

Jong, de, I. S. M., Boumen, R., Mortel - Fronczak, van de, J. M. & Rooda, J. E., 2007, Tangram: Model-based integration and testing of complex high-tech systems. Tretmans, J. (ed.). Eindhoven: Embedded Systems Institute, p. 31-44

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Open Access
File
Planning
Safety
System integration
Testing
Time to market
31 Downloads (Pure)

Model-based integration and testing in practice

Braspenning, N. C. W. M., Mortel - Fronczak, van de, J. M., Neerhof, H. A. J. & Rooda, J. E., 2007, Tangram: Model-based integration and testing of complex high-tech systems. Tretmans, J. (ed.). Eindhoven: Embedded Systems Institute, p. 85-100

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Open Access
File
2 Downloads (Pure)

Modeling and analysis of manufacturing systems

Lefeber, A. A. J. & Rooda, J. E., 2007, Handbook of Dynamic System Modeling. Fishwick, P. A. (ed.). Boca Raton, Fla: Chapman & Hall/CRC Press, 20 p. 34

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

9 Citations (Scopus)

Multi-level computational fluid dynamics models for the description of particle mixing and granulation.

Sint Annaland, van, M., Deen, N. G. & Kuipers, J. A. M., 2007, Handbook of power technology, Vol 11. Salman, A. D., Hounslow, M. J. & Seville, J. P. K. (eds.). Amsterdam: Elsevier, p. 1071-1107

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Granulation
Dynamic models
Computational fluid dynamics
1 Citation (Scopus)

Nonlinear and adaptive control of chaos

Fradkov, A. L. & Pogromski, A. Y., 2007, Handbook of Chaos Control. Schöll, E. & Schuster, H. Z. (eds.). 2nd ed. Weinheim: Wiley-VCH Verlag, p. 129-157

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Chaos
Stabilization
Slaves
Synchronization
Linearization
1 Citation (Scopus)

Nonlinear chaos control and synchronization

Huijberts, H. J. C. & Nijmeijer, H., 2007, Handbook of Chaos Control, 2nd ed.. Schöll, E. & Schuster, H. G. (eds.). Weinheim: Wiley-VCH Verlag, p. 719-749

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Chaos Control
Chaos Synchronization
Nonlinear Control
LaSalle's Invariance Principle
Lyapunov Direct Method
5 Citations (Scopus)

Numerical modelling of self healing mechanisms

Remmers, J. J. C. & Borst, de, R., 2007, Self healing materials : an alternative approach to 20 centuries of materials science. Zwaag, van der, S. (ed.). Berlin: Springer, p. 365-380 (Springer Series in Materials Science; vol. 100).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Cracks
Microencapsulation
Polymers
Polymerization
Concretes
26 Downloads (Pure)

Optimal integration and test planning for lithographic systems

Boumen, R., Jong, de, I. S. M., Mortel - Fronczak, van de, J. M. & Rooda, J. E., 2007, Tangram: Model-based integration and testing of complex high-tech systems. Tretmans, J. (ed.). Eindhoven: Embedded Systems Institute, p. 73-84

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Open Access
File
3 Downloads (Pure)

Predicting mechanical performance of polymers

Meijer, H. E. H., Govaert, L. E. & Engels, T. A. P., 2007, Structure-property correlation and characterization techniques. Matyjaszewski, K., Gnanou, Y. & Leibler, L. (eds.). Weinheim: Wiley-VCH Verlag, p. 1783-1825 (Macromolecular engineering : precise synthesis, materials properties, applications; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

1 Downloads (Pure)

Process algebra

Baeten, J. C. M., Beek, van, D. A. & Rooda, J. E., 2007, Handbook of Dynamic System Modeling. Fishwick, P. A. (ed.). Boca Raton: Chapman & Hall/CRC Press, p. 19.1-19.19 (Chapman&Hall/CRC Computer and Information Science Series).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Test time reduction by optimal test sequencing

Boumen, R., Jong, de, I. S. M., Mortel - Fronczak, van de, J. M. & Rooda, J. E., 2007, Tangram: Model-based integration and testing of complex high-tech systems. Tretmans, J. (ed.). Eindhoven: Embedded Systems Institute, p. 61-72

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

1 Downloads (Pure)

Thermal Biomass Conversion and NOx Emissions in Grate Furnaces

Bastiaans, R. J. M., Kuijk, van, H. A. J. A., Albrecht, B. A., Oijen, van, J. A. & Goey, de, L. P. H., 2007, Catalysis for Renewables: From Feedstock to Energy Production. Centi, G. & Santen, van, R. A. (eds.). Weinheim: Wiley-VCH Verlag, p. 163-181

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

31 Downloads (Pure)

Using models in the integration and testing process

Braspenning, N. C. W. M., Mortel - Fronczak, van de, J. M., Ploeg, van der, D. O. & Rooda, J. E., 2007, Tangram: Model-based integration and testing of complex high-tech systems. Tretmans, J. (ed.). Eindhoven: Embedded Systems Institute, p. 101-114

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Open Access
File
2008
1 Downloads (Pure)

Advances in delamination modeling

Sluis, van der, O., Yuan, C. A., Driel, van, W. D. & Zhang, G. Q., 2008, Nanopackaging : nanotechnologies and electronics packaging. Morris, J. E. (ed.). New York: Springer, p. 61-91

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Delamination
Glues
Microelectronics
Soldering alloys
Failure modes
4 Citations (Scopus)
55 Downloads (Pure)

Brittle fracture-based experimental methodology for microstructure analysis

Hoefnagels, J. P. M., Tasan, C. C., Pradelle, M. & Geers, M. G. D., 2008, Advanced in Experimental Mechanics VI. Dulieu-Barton, J. M., Lord, D. & Greene, R. J. (eds.). Zurich: Trans Tech Publications, p. 133-139

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Open Access
File
brittle fracture
microstructure
methodology
micromorphology
metal
1 Citation (Scopus)
1 Downloads (Pure)

Chemoenzymatic synthesis of block copolymers

Geus, de, M., Palmans, A. R. A., Duxbury, C. J., Villarroya, S., Howdle, S. M. & Heise, A., 2008, Polymer biocatalysis and biomaterials II. Cheng, H. N. & Gross, R. A. (eds.). Washington: American Chemical Society, p. 216-229 (ACS symposium series; vol. 999).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Atom transfer radical polymerization
Block copolymers
Ring opening polymerization
Carbon Dioxide
Polymerization
67 Citations (Scopus)
1 Downloads (Pure)

Computational methods for debonding in composites

Borst, de, R. & Remmers, J. J. C., 2008, Mechanical response of composites. Camanho, P. P., Davila, C. G. & Pinho, S. T. (eds.). Berlin: Springer, p. 1-25 (Computational methods in applied sciences; vol. 10).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Debonding
Computational methods
Delamination
Composite materials
Laminated composites

Developing some of Kurt Hain's inventions (Anmerkungen zu einigen Entdeckungen Kurt Hains in der Getriebelehre)

Dijksman, E. A., 2008, Ehrenkolloqiuim anlässlich des 100. Geburtstages von Herrn E.h. Kurt Hain. Lenarcic, J. & Parenti-Castelli`, V. (eds.). Dresden: Technische Universität Dresden, p. 131-147

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

4 Citations (Scopus)
31 Downloads (Pure)

Experimental-numerical analysis of the indentation-based damage characterization methodology

Tasan, C. C., Hoefnagels, J. P. M., Louws, L. C. N. & Geers, M. G. D., 2008, Advances in Experimental Mechanics VI. Dulieu-Barton, J. M., Lord, J. D. & Greene, R. J. (eds.). Trans Tech Publications, p. 151-160 10 p. (Applied Mechanics and Materials; vol. 13-14).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Open Access
File
Indentation
Numerical analysis
Hardness
Degradation
Sheet metal
66 Downloads (Pure)

Experimental-numerical analysis of the indentation-based damage characterization methodology

Tasan, C. C., Hoefnagels, J. P. M., Louws, L. C. N. & Geers, M. G. D., 2008, Advanced in Experimental Mechanics VI. Dulieu-Barton, J. M., Lord, D. & Greene, R. J. (eds.). Zurich: Trans Tech Publications, p. 183-192

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Open Access
File
Indentation
Numerical analysis
Hardness
Degradation
Sheet metal
4 Citations (Scopus)
52 Downloads (Pure)

First-order size effects in the mechanics of miniaturized components

Hoefnagels, J. P. M., Janssen, P. J. M., Keijser, de, T. H. & Geers, M. G. D., 2008, Advanced in Experimental Mechanics VI. Lord, D., Greene, R. J. & Dulieu-Barton, J. M. (eds.). Zurich: Trans Tech Publications, p. 183-192

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Open Access
File
grain boundaries
statistics
cross sections
microstructure
plastic flow
6 Citations (Scopus)

Lyapunov stability theory for measure differential inclusions

Leine, R. I. & van de Wouw, N., 15 Jan 2008, Stability and Convergence of Mechanical Systems with Unilateral Constraints. Leine, R. I. & van de Wouw, N. (eds.). Berlin: Springer, p. 109-152 44 p. (Lecture Notes in Applied and Computational Mechanics; vol. 36).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

26 Downloads (Pure)

Numerical Methods for the Modelling of Debonding in Composites

Borst, de, R., 2008, Lecture Notes on Composite Materials. Borst, de, R. & Sadowski, T. (eds.). Berlin: Springer, p. 37-76 (Solid Mechanics and Its Applications; vol. 154).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

delamination
numerical method
modeling
shell
Galerkin method
1 Downloads (Pure)

Shape memory alloys in micro- and nanoscale engineering applications

Bellouard, Y. J., 2008, Smart materials. Schwartz, M. (ed.). Boca Raton: CRC Press, p. 20/9-17

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

shape memory alloys
microbalances
engineering
2009

Advances in data-driven optimization of parametric and non-parametric feedforward control designs with industrial applications

Tousain, R. L. & Meulen, van der, S. H., 2009, Model-based control : bridging rigorous theory and advanced technology. Hof, van den, P. M. J., Scherer, C. & Heuberger, P. S. C. (eds.). Springer, p. 167-184

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Feedforward control
Industrial applications
Controllers
Projection systems
Electric lamps
5 Citations (Scopus)

A Precis of Two-Scale Approaches for Fracture in Porous Media

Borst, de, R., Rethore, J. & Abellan, M. A., 2009, Lecture Notes on Composite Materials. Berlin: Springer, p. 149-171 (Solid Mechanics and its applications; vol. 154).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

porous medium
micromechanics
fluid
nonlinearity
mass balance
7 Downloads (Pure)

Control of finite-dimensional port-Hamiltonian systems

Garcia Canseco, E., Ortega, R., Pasumarthy, R. & Schaft, van der, A. J., 2009, Modeling and Control of Complex Physical Systems : the Port-Hamiltonian Approach. Duindam, V., Macchelli, A., Stramigioli, S. & Bruyninckx, H. (eds.). Berlin: Springer, p. 273-318

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Hamiltonians
Lyapunov functions
Energy transfer
Stabilization
Control systems
6 Citations (Scopus)

Evaluation of four nucleate flow boiling models

Kroes, J. P., Geld, van der, C. W. M. & Velthooven, van, E., 2009, Advances in multiphase flow and heat transfer, Vol. 1. Bentham Science Publishers B.V., p. 267-283

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

diesel engine
heat flux
heat transfer
evaluation
1 Downloads (Pure)

Frequency domain performance analysis of marginally stable LTI systems with saturation

Berg, van den, R. A., Pogromski, A. Y. & Rooda, J. E., 2009, Dynamics and control of hybrid dynamical systems. Leonov, G., Nijmeijer, H., Pogromsky, A. & Fradkov, A. (eds.). Singapore: World Scientific, p. 53-70 246 p. (World scientific series on nonlinear science. Series B; vol. 14).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Frequency domain analysis
Describing functions
Feedback
6 Citations (Scopus)

Further Results on "Robust MPC Using Linear Matrix Inequalities"

Lazar, M., Heemels, W. P. M. H., Munoz de la Pena, D. & Alamo, T., 2009, Nonlinear Model Predictive Control : Towards New Challenging Applications. Magni, L., Allgöwer, F. & Raimondo, D. M. (eds.). Berlin: Springer, p. 89-98 (Lecture notes in control and information sciences; vol. 384).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Linear matrix inequalities
Costs
Closed loop systems
Linear systems

Further switched systems

Bemporad, A., Camlibel, M. K., Heemels, W. P. M. H., Schaft, van der, A. J., Schumacher, J. M. & Schutter, de, B., 2009, Handbook of hybrid systems control : theory, tools, applications. Lunze, J. & Lamnabhi-Lagarrigue, F. (eds.). Cambridge University Press, p. 139-192

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Switched Systems
Hybrid Systems
Linear Complementarity
Model
Model Predictive Control
8 Citations (Scopus)
4 Downloads (Pure)

Huygens' synchronization : a challenge

Nijmeijer, H. & Pogromski, A. Y., 2009, Dynamics and control of hybrid dynamical systems. Leonov, G., Nijmeijer, H., Pogromsky, A. & Fradkov, A. (eds.). Singapore: World Scientific, p. 1-6 246 p. (World scientific series on nonlinear science. Series B; vol. 14).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Synchronization
Oscillation
Electrical Circuits
Beat
Pendulum

Interchange formats and tool integration

Beek, van, D. A., Reniers, M. A., Rooda, J. E. & Schiffelers, R. R. H., 2009, Handbook of hybrid systems control : theory, tools, applications. Lunze, J. & Lamnabhi-Lagarrigue, F. (eds.). New York: Cambridge University Press, p. 361-374

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Interchanges
2 Downloads (Pure)

Introduction to hybrid systems

Heemels, W. P. M. H., Lehmann, D., Lunze, J. & Schutter, de, B., 2009, Handbook of hybrid systems control : theory, tools, applications. Lunze, J. & Lamnabhi-Lagarrigue, F. (eds.). Cambridge University Press, p. 3-30

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

System theory
Hybrid systems
Dynamical systems

Measuring techniques for particle formulation processes

Heinrich, S., Deen, N. G., Peglow, M., Adams, M., Kuipers, J. A. M., Tsotsas, E. & Seville, J. P. K., 2009, Experimental techniques. Tsotsas, E. & Mujumdar, A. S. (eds.). Weinheim: Wiley-VCH Verlag, p. 187-278 374 p. (Modern drying technology; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Mechanical properties of brain tissue: characterisation and constitutive modelling

Dommelen, van, J. A. W., Hrapko, M. & Peters, G. W. M., 2009, Mechanosensitivity of the nervous system. Kamkin, A. & Kiseleva, I. (eds.). Berlin: Springer, p. 249-279 (Mechanosensitivity in Cells and Tissues; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Brain
Tissue
Mechanical properties
Testing
Materials properties
7 Downloads (Pure)

Mixing of immiscible liquids

Meijer, H. E. H., Janssen, J. M. H. & Anderson, P. D., 2009, Mixing and compounding of polymers : theory and practice. Manas-Zloczower, I. (ed.). Munich ; Cincinnati: Hanser Publishers, p. 41-182

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

liquid
coalescence
matrix
shear stress
fluid
2 Citations (Scopus)

Optimizing a physical security configuration using a highly detailed simulation model

Marechal, T. M. A., Smith, A. E., Ustun, V., Smith, J. S. & Lefeber, A. A. J., 2009, Handbook of military industrial engineering. Badiru, A. B. & Thomas, M. U. (eds.). Boca Raton: CRC Press, p. 2-1/17 (Industrial Innovation Series).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Genetic algorithms
Ant colony optimization
Security systems
Cameras

Overview of tools development and open problems

Beek, van, D. A. & Engell, S., 2009, Handbook of hybrid systems control : theory, tools, applications. Lunze, J. & Lamnabhi-Lagarrigue, F. (eds.). New York: Cambridge University Press, p. 279-283

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Polymers@TU/e

Meijer, H. E. H., 2009, Dies Natalis presentations on the occasion of the 53rd Dies Natalis of the Eindhoven University of Technology, Eindhoven, 24 April 2009. Eindhoven: Technische Universiteit Eindhoven, p. 16-21

Research output: Chapter in Book/Report/Conference proceedingChapterPopular

1 Citation (Scopus)
4 Downloads (Pure)

Recovering data from cracked optical discs using Hankel iterative learning control

Steinbuch, M., Wijdeven, van de, J. J. M., Oomen, T. A. E., Berkel, van, K. & Leenknegt, G. A. L., 2009, Model-based control : bridging rigorous theory and advanced technology. Hof, van den, P. M. J., Scherer, C. & Heuberger, P. S. C. (eds.). Springer, p. 147-166

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Cracks
Lenses
Actuators
Recovery