Department of Mechanical Engineering

Research Output 1957 2020

Filter
Chapter
1997

Building safer protection systems with high common cause strength.

Goble, W. M. & Fialkowski, C., 1997, Proceedings of Instrument Asia Conference.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Capturing the design history from teamwork : is it effective in practice?

Wiegeraad, S. J. H. W. & Kriens, R. F. C., 1997, World class design by world class methods : proceedings of the 11th international conference on engineering design in Tampere, ICED 97, Tampere. Vol. 2. Riitahuhta, A. (ed.). Tampere: Tampere University of Technology, Laboratory of Machine Design, p. 345-350 (Schriftenreihe WDK; vol. 25).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

CMM stability evaluation by periodic measurement of a simple 1D artefact

Levasier, L., 1997, Proceedings Workshop on Traceability of Coordinate machines. p. 1-10 11 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Comparison of algorithms for unsteady flow calculations in inlet and exhaust systems of IC engines

Voorde, van de, M., Sierens, R., Dick, E., Vierendeels, J. & Baert, R. S. G., 1997, Proceeding ASME Fall Technical Conference. 10 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Compressive strain induced damage in muscle cells in vitro

Bouten, C. V. C., Lee, D. A. & Bader, D. L., 1997, Cellular Engineering. Rolfe, P. (ed.). p. 19-22 4 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Control design for a pick-and-place mechanism

Steinbuch, M. & Vervoordeldonk, M. J., 1997, Interaction between dynamics and control in advanced mechanical systems : proceedings of the IUTAM symposium, 21-26 April, 1996, Eindhoven, the Netherlands. Campen, van, D. H. (ed.). Dordrecht: Kluwer Academic Publishers, p. 383-390 441 p. (Solid mechanics and its applications. SMIA; vol. 52).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Control System Software Reliability - Stress versus Strength.

Goble, W. M., 1997, Proceedings of Chemputer 5 conference, Chemical Engineering.. New Orleans

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Determination of the crack resistance of thin hard coatings by in situ bending in scanning electron microscope

Tran, M. D., Dekkers, E. C. A., Diesen, van, R. & Dautzenberg, J. H., 1997, Mikro- und Nanotechnologie. Wien, Austria: TU, p. 135-140 6 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Generalization of the pseudo-forces method for characterizing structure-borne sound sources

Janssens, M. H. A., Langeveld, C. M. & Verheij, J. W., 1997, Proc. Inter-Noise. Augusztinovicz, F. (ed.). Budapest, p. 705-709 3 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

acoustics

High-order damage models for the modelling of fracture in quasi-brittle materials.

Geers, M. G. D., Peerlings, R. H. J., Borst, de, R. & Brekelmans, W. A. M., 1997, Material Instabilities in Solids. Borst, de, R. & Giessen, van der, E. (eds.). Wiley, p. 405-423

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

68 Downloads (Pure)

Kinematic models and the human pelvis

Huson, A., 1997, Movement, stability and low back pain : the essential role of the pelvis. Vleeming, A. (ed.). New York: Churchill Livingstone, p. 123-131 612 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Open Access
File
62 Downloads (Pure)

Manifold based control for a 1-dof beam with one-sided spring using feedback linearization

Heertjes, M. F., Molengraft, van de, M. J. G., Kraker, de, A., Campen, van, D. H. & Kok, J. J., 1997, Proceedings of the 1st International conference on Control of Oscillations and Chaos, 27-29 August 1997, St. Petersburg, Russia. Chernousko, F. L. & Fradkov, A. L. (eds.). Piscataway: Institute of Electrical and Electronics Engineers, p. 5-8

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Open Access
File
Feedback linearization
Eigenvalues and eigenfunctions
Trajectories
39 Downloads (Pure)

Measurement of sacroiliac joint stiffness with color Doppler imaging and the importance of asymmetric stiffness in sacroliac pathology

Buyruk, H. M., Stam, H. J., Snijders, C. J., Vleeming, A., Lameris, J. S. & Holland, W. P. J., 1997, Movement, sability and low back pain : the essential role of the pelvis. Vleeming, A. (ed.). New York: Churchill Livingstone, p. 297-307

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Open Access
File

Mechanical characterisation of PVD titaniumcarbide coatings.

Meer, van der, M., Hoeben, A. H. L. & Dautzenberg, J. H., 1997, Advanced Materials and Processes and Applications.. Maastricht, p. 37-40 4 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Modeling of the blanking process

Brokken, D., Goijaerts, A. M., Brekelmans, W. A. M., Oomens, C. W. J. & Baaijens, F. P. T., 1997, Computational Plasticity, Fundamentals and Applications. Owen, D. R. J., Onate, E. & Hinton, E. (eds.). p. 1417-1424 8 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Modeling the elastoplastic behaviour of perforated plates.

Rens, van, B. J. E., Brekelmans, W. A. M., Rusch, J. J. & Baaijens, F. P. T., 1997, Computational Plasticity, Fundamentals and Applications. Owen, D. R. J., Onate, E. & Hinton, E. (eds.). p. 1998-2004 7 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Modelling the human head under impact conditions: a parametric study.

Claessens, M. H. A., Sauren, A. A. H. J. & Wismans, J. S. H. M., 1997, Proc. 41th Stapp Car Crash Conference. Prasad, P. (ed.). Orlando, p. 315-328

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Modification of the Craig-Bampton CMS procedure for general systems

Kraker, de, A. & Campen, van, D. H., 1997, Design Engineering Technical Conferences, Symposium on Time-Varying Systems and Structures. Sinha, S. C., Cusumano, J. P. & O'Reilly, O. M. (eds.). Sacramento, CA (USA), 9 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

1 Citation (Scopus)

Not viscous drag but matric forces are responsible for skin barrier function

Kemenade, van, P. M., Huyghe, J. M. R. J. & Douven, L. F. A., 1997, Bioengineering Division Vol. 36. Simon, B. (ed.). New York, p. 35-36 2 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Numerical analysis of the wall-ironing process of coated sheet metal

Schreurs, P. J. G. & Baaijens, F. P. T., 1997, On Computational Plasticity. p. 1439-1444 6 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Performance-based safety standards : an ISA TECH 1997

Moore, L., Bhimavarapu, K. & Stavrianidis, P., 1997, ISA TECH/EXPO Technology update volume 1. Anaheim

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Risk assessment
Life cycle
Personnel
Specifications
Industry
36 Downloads (Pure)

Processing for properties

Meijer, H. E. H., 1997, Processing of Polymers. Meijer, H. E. H. (ed.). Weinheim: VCH Verlagsgesellschaft, p. 3-75 73 p. (Materials science and technology; vol. 18).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Open Access
File
2 Citations (Scopus)
58 Downloads (Pure)

Processing of polymers using reactive solvents

Lemstra, P. J., Kurja, J. & Meijer, H. E. H., 1997, Processing of polymers. Meijer, H. E. H. (ed.). Weinheim: VCH Verlagsgesellschaft, p. 513-547

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Open Access
File
Functional polymers
Processing
Polymers

Reliability Management & Engineering, Invited paper & lecture at seminar "The Reliability Challenge"

Brombacher, A. C., 1997, Regents College, London, September 1997,. London

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Some aspects of the analysis of stick-slip vibrations with an application to drill strings

Vrande, van de, B. L., Campen, van, D. H. & Kraker, de, A., 1997, Symposium on Time-Varying Systems and Structures. Sinha, S. C., Cursumano, J. P. & O'Reilly, O. M. (eds.). Sacramento, CA (USA), 8 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Structural development in highly oriented glassy poly(ethylene) terephthalate) with temperature and mechanical stress.

Göschel, A. G. P. U., 1997, ACS Div. Of Polymeric Materials: Science and Engineering. p. 531-533 3 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

The 1oo2D Safety PLC : how it works.

Goble, W. M., 1997, Proceedings of the ISA New Orleans Conference, April 1997..

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

The Effect of a Local Thermal Shock Load on Plasma Sprayed TBC's.

Koolloos, M. F. J., Liempd, van, G. G. & Houben, J. M., 1997, Proceedings of Surface Modification and Technologies XI, T.S.. Sudarshan, M. & Jeandin and Khor, K. A. (eds.). Paris

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

The evolution of safety system architectures.

Goble, W. M. & Fialkowski, C., 1997, Proceedings of Instrument Asia Conference..

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Theoretical and experimental study of a generalized pseudo-forces method for source characterization

Janssens, M. H. A., Langeveld, C. M. & Verheij, J. W., 1997, Proc. Fifth Int. Congress on Sound and Vibration. Hansen, C. H. & Vokalek, G. (eds.). Adelaide (Australia), p. 1547-1554 8 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Using Smart Transmitters in Safety Applications.

Goble, W. M., 1997, Proceedings of TECH97, ISA TECH/EXPO Technology update volume 1, ISA TECH/97. Anaheim

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

21 Downloads (Pure)

Vibration control of a nonlinear beam system

Heertjes, M. F., Molengraft, van de, M. J. G., Kok, J. J., Fey, R. H. B. & Vorst, van de, E. L. B., 1997, Interaction between dynamics and control in advanced mechanical systems : proceedings of the IUTAM symposium, 21-26 April 1996, Eindhoven, The Netherlands. Campen, van, D. H. (ed.). Dordrecht: Kluwer Academic Publishers, p. 135-142 441 p. (Solid mechanics and its applications. SMIA; vol. 52).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Open Access
File
vibration
1998

Accelerated vehicle development by capturing and re-using design knowledge

Wiegeraad, S. J. H. W. & Kriens, R. F. C., 1998, Proceedings of the 1998 FISITA World Automotive Congress, 'The Second Century of the Automobile', Paris, September 27 - October 1, 1998. Wiegeraad, S. J. H. W. (ed.). Paris

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

10 Citations (Scopus)
3 Downloads (Pure)

A mathematical human body model for frontal and rearward seated automotive impact loading

Happee, R., Hoofman, M., Kroonenberg, van den, A., Morsink, P. & Wismans, J. S. H. M., 1998, 42nd Stapp Car Crash conference proceedings, Tempe, Arizona, 2-4 November 1998. Schneider, L. (ed.). Tempe, USA, p. 75-88 3 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Analysis and optimization of bell systems

Schoofs, A. J. G. & Campen, van, D. H., 1998, Proc. 11th Carillon World Congress. Campen, van, D. H. (ed.). Mechelen and Leuven (Belgium), 25 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

A three dimensional continuum model of skeletal muscle

Gielen, A. W. J., Bovendeerd, P. H. M. & Janssen, J. D., 1998, Computer Methods in Biomechanics & Biomedical Engineering -2. Middleton, J., Jones, M. L. & Pande, G. N. (eds.). Amsterdam: Gordon and Breach Science Publishers, p. 543-551 10 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

skeletal muscle
continuums
muscles
plane stress
plane strain

Conservatism of the standard upper bound test: Is sup mu(up)/mu finite? : Is it bounded by 2?

Toker, O. & Jager, de, A. G., 1998, Open problems in Mathematical Systems and Control Theory. Bondel, V. D., Sontag, E. D., Vidyasagar, M. & Willems, J. C. (eds.). London: Springer, p. 225-228 4 p. (Communications and control engineering).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Politics

DNS of subsonic spatially developing shear flow

Wasistho, B., Bruin, de, I. C. C., Geurts, B. J. & Kuerten, J. G. M., 1998, Advances in turbulence VII : proceedings of the 7th European turbulence conference, held in Saint-Jean Cap Ferrat, France, 30 June - 3 July 1998. Frisch, U. (ed.). Dordrecht: Kluwer Academic Publishers, p. 175-178 636 p. (Fluid Mechanics and Its Applications; vol. 46).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Drop size distribution evolution after continuous or intermittent injection of butane or propane in a confined airflow.

Knubben, G. & Geld, van der, C. W. M., 1998, Proceedings European Two-Phase Flow Group Meeting, J2. Kubben, G. (ed.). p. 1-33

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Entwicklung kompatibler Fahrzeuge mittels kompatibilitätsbewertender Crashsimulation

Relou, J. & Spronck, J., 1998, Proceedings of the 9. Internationaler VDI Kongress Berechnung und Simulation im Fahrzeugbau (9th International VDI Congres on Numerical Analysis and Simulation in Vehicle Engineering). Relou, J. (ed.). Duesseldorf: VDI-Verlag, p. 53-78 (VDI-Berichte; vol. 1411).

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Failure Mechanisms During Thermal Cycling of Plasma Sprayed ZrO2-Y2O3 TBCs and the Effect of a Pre-Oxidized NiCrAlY Bond Coat

Koolloos, M. F. J. & Houben, J. M., 1998, ASM International Materials Solutions Conference 98, at the Oxidation Resistant and Thermal Barrier Coatings Symposium,. Rosemont, Illinois, USA, 12-15 October 1998.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

11 Citations (Scopus)

From LMN's via LDI's towards LMI's

Angelis, G. Z. & Molengraft, van de, M. J. G., 1998, 17th Benelux Meeting on Systems and Control. Mierlo, The Netherlands, p. 193-193 1 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

4 Downloads (Pure)

Geluid van mechanische overbrengingen

Cuijpers, M. J. M., 1998, Handboek aandrijf- en besturingstechniek. Alphen aan den Rijn: Samsom Bedrijfsinformatie, p. 1-29 B10000

Research output: Chapter in Book/Report/Conference proceedingChapterPopular

4 Downloads (Pure)

Higher-order damage models for the analysis of fracture in quasi-brittle materials

Geers, M. G. D., Peerlings, R. H. J., Borst, de, R. & Brekelmans, W. A. M., 1998, Material instabilities in solids. Borst, de, R. & Giessen, van der, E. (eds.). Chichester: Wiley, p. 405-424 576 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

brittle materials
damage
gradients
crack propagation
notches

Key engine technologies for clean urban transport vehicles

Baert, R. S. G. & Steen, van der, M., 1998, Proc. Symp. on Computational and Experimental Methods in Mechanical and Thermal Engineering. Dick, E., Baets, de, P. & Sierens, R. (eds.). Gent Belgium

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

21 Downloads (Pure)

Large scale dynamic-economic optimization of industrial processes: a modified sequential approach

Tousain, R. L., Schot, van der, J. J., Backx, A. C. P. M. & Bosgra, O. H., Dec 1998, Selected topics in identification modelling and control : progress report on research activities in the Mechanical Engineering Systems and Control Group. Bosgra, OH., Van den Hof, P. M. J. & Scherer, C. W. (eds.). Delft: Delft University Press, Vol. 11. p. 33-41 9 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademic

Open Access
File

Long term dynamics of mdof systems with local nonlinearities

Campen, van, D. H., Vorst, van de, E. L. B., Fey, R. H. B. & Kraker, de, A., 1998, 2nd International conference on nonlinear dynamics, chaos, and control and their applications to engineering sciences, Sao Pedro, Pracicaba, 4-9 August 1996. Balthazar, J. M., Mook, D. T. & Rosário, J. M. (eds.). Sao Paulo (Brazil): AAM/ABCM, p. 7-13 7 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Mixture models : validation and parameter estimation

Oomens, C. W. J., Huyghe, J. M. R. J. & Janssen, J. D., 1998, Computer Methods in Biomechanics & Biomedical Engineering 2. Middleton, J., Jones, M. L. & Pande, G. N. (eds.). Amsterdam: Gordon and Breach Science Publishers, p. 511-518 8 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

Parameter estimation
Program processors
Tissue
Ions
Experiments
1 Downloads (Pure)

Modelling and calculation of a partially premixed turbulent flame

Ovink, R. & Lamers, A. P. G. G., 1998, Detailed studies of combustion phenomena : preliminary proceedings of the EUROTHERM seminar no. 61, October 12-14, 1998, 's Hertogenbosch, The Netherlands. Goey, de, L. P. H. & Maas, U. (eds.). Eindhoven: Eindhoven University of Technology, Vol. 2. p. E19-E31

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

52 Citations (Scopus)

Modelling of the metal blanking process.

Goijaerts, A. M., Stegeman, Y. W., Govaert, L. E., Brokken, D., Brekelmans, W. A. M. & Baaijens, F. P. T., 1998, 1 st Esaform Conf. on Material Forming. Chenot, J. L., Agassant, J. F., Montmitonnet, P., Vergnes, B. & Billon, N. (eds.). France, p. 185-194 4 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review