Research Output per year
Research Output 1957 2020
- 1 - 50 out of 456 results
- Publication Year, Title (descending)
2019
Bifurcation-based shimmy analysis of landing gears using flexible multibody models
Beckers, C., Öngüt, A. E., Verbeek, G., Fey, R., Lemmens, Y. & van de Wouw, N., 15 Mar 2019, Nonlinear Structural Dynamics and Damping. Jauregui, J. C. (ed.). Cham: Springer Nature Switzerland AG, p. 261-292 31 p. (Mechanisms and Machine Science; vol. 69)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Landing gear (aircraft)
Hopf bifurcation
Actuators
Damping
Aircraft
Compatibilization of polymer blends by Janus particles
Cardinaels, R., 10 Oct 2019, Compatibilization of Polymer Blends. A.R., A. & Thomas, S. (eds.). New York: ElsevierResearch output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Complex dynamics of deterministic nonlinear systems
Steur, E. & Nijmeijer, H., 20 Mar 2019, Complexity science: an introduction. Peletier, M. A., van Santen, R. A. & Steur, E. (eds.). Singapore: World Scientific, p. 83-128 46 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Complex Dynamics
Nonlinear Systems
Nonlinear Dynamical Systems
Interconnection
Future trends in electric vehicles enabled by internet connectivity, solar, and battery technology
Rutten, B. & Cobbenhagen, R., 18 Jul 2019, Automotive Systems and Software Engineering: State of the Art and Future Trends. Dajsuren, Y. & van den Brand, M. (eds.). Cham: Springer International Publishing Switzerland, p. 323-346 24 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Electric vehicles
Railroad cars
Internet
Analog to digital conversion
Automotive industry
Latent heat storage for solar still applications
Anand, A., Kant, K., Shukla, A. & Sharma, A., 23 May 2019, Solar Desalination Technology. Kumar, A. & Prakash, O. (eds.). 1st ed. Springer Singapore: Springer, p. 293-323 (Green Energy Technology)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Heat storage
Latent heat
Phase change materials
Environmental technology
Carbon footprint
Tire characteristics and modeling
Besselink, I. J. M., 1 Jan 2019, CISM International Centre for Mechanical Sciences, Courses and Lectures. Cham: Springer, p. 47-108 62 p. (CISM International Centre for Mechanical Sciences, Courses and Lectures; vol. 582)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Tire
Tires
Modeling
Moment
Inclination
Wave and vibration analysis of rotating periodic structures by wave-based methods
Beli, D., Brandão Silva, P., Mencik, J. M. & de França Arruda, J. R., 2019, Mechanisms and Machine Science. Cavalca, K. & Weber, H. (eds.). Cham: Springer, p. 518-529 12 p. (Mechanisms and Machine Science; vol. 61)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Periodic structures
Vibration analysis
Metamaterials
Wave propagation
Energy gap
2018
Advances in delamination modeling of metal/polymer systems: atomistic aspects
van der Sluis, O., Iwamoto, N., Qu, J., Yang, S., Yuan, C., van Driel, W. D. & Zhang, K., 1 Sep 2018, Nanopackaging: nanotechnologies and electronics packaging. Morris, J. (ed.). 2 ed. Dordrecht: Springer, p. 129-183 55 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Delamination
Polymers
Adhesion
Metals
Sheet molding compounds
Advances in delamination modeling of metal/polymer systems: continuum aspects
van der Sluis, O., Vossen, B. G., Neggers, J., Ruybalid, A. P., Chockalingam, K., Peerlings, R. H. J., Hoefnagels, J. P. M., Remmers, J. J. C., Kouznetsova, V., Schreurs, P. J. G. & Geers, M. G. D., 1 Sep 2018, Nanopackaging: nanotechnologies and electronics packaging. Morris, J. (ed.). Dordrecht: Springer, p. 83-128 46 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
adhesion
continuums
polymers
metals
parameter identification
A generic transmission model for hybrid Electric Drives Integration of the dynamic behavior of all conventional-, electric-, and hybrid -transmission mode types in a single model
van Harselaar, W., Brouwer, M. & Hofman, T., 2018, Dritev- drivertrain for vehicles, edrive, transmissions in mobile machines, 2018. VDI-Verlag, p. 163-179 16 p. (VDI Berichte; vol. 2328)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
A microfluidic droplet array system for cell-based drug combination screening
Du, G. S., Pan, J. Z., Zhao, S. P., Zhu, Y., den Toonder, J. M. J. & Fang, Q., 10 Apr 2018, Cell-based microarrays : methods and protocols. Ertl, P. & Rothbauer, M. (eds.). Dordrecht: Springer, p. 203-211 9 p. (Methods in Molecular Biology; vol. 1771)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Preclinical Drug Evaluations
Microfluidics
Drug Combinations
Cell Culture Techniques
Syringes
Artificial cilia: fabrication, actuation, and flow generation
den Toonder, J. M. J., Wang, Y., Zhang, S. & Onck, P. R., 1 Sep 2018, Atlas of cilia bioengineering and biocomputing. Mayne, R. & den Toonder, J. (eds.). Gistrup: River Publishers, p. 109-134Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Comparison of DNS of compressible and incompressible turbulent droplet-laden heated channel flow with phase transition
Bukhvostova, A., Russo, E., Kuerten, J. G. M. & Geurts, B. J., 2018, Direct and Large-Eddy Simulation X. Grigoriadis, D. G. E., Geurts, B. J., Kuerten, H., Fröhlich, J. & Armenio, V. (eds.). Dordrecht: Springer, p. 181-187 7 p. (ERCOFTAC Series; vol. 24)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
multiphase flow
channel flow
cooling
particle motion
gases
Direct numerical simulation of biomass combustion in a turbulent particle-ladeb channel flow
Awasthi, A., Kuerten, J. G. M. & Geurts, B. J., 2018, Direct and Large-Eddy Simulation X. Grigoriadis, D. G. E., Geurts, B. J., Kuerten, H., Fröhlich, J. & Armenio, V. (eds.). Dordrecht: Springer, p. 379-384 6 p. (ERCOFTAC Series; vol. 24)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Direct numerical simulation
Channel flow
Biomass
Fossil fuels
Flow of gases
Experimental validation of torsional controllers for drilling systems
van de Wouw, N., Nijmeijer, H., Vromen, T., van Helmond, M. J. M., Astrid, P. & Doris, A., 7 Jun 2018, Advanced Topics in Nonsmooth Dynamics: Transactions of the European Network for Nonsmooth Dynamics. Cham: Springer, p. 291-334 44 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Stick-slip
Drilling
Drill strings
Controllers
Rocks
Heat transfer in droplet-laden turbulent channel flow with phase transition in the presence of a thin film of water
Bukhvostova, A., Kuerten, J. G. M. & Geurts, B. J., 2018, Direct and Large-Eddy Simulation X. Grigoriadis, D. G. E., Geurts, B. J., Kuerten, H., Fröhlich, J. & Armenio, V. (eds.). Dordrecht: Springer, p. 521-527 7 p. (ERCOFTAC Series; vol. 24)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
channel flow
heat transfer
thin films
water
turbulent flow
Mimetic spectral element method for anisotropic diffusion
Gerritsma, M., Palha, A., Jain, V. & Zhang, Y., 1 Oct 2018, SEMA SIMAI Springer Series. Di Pietro, D., Ern, A. & Formaggia, L. (eds.). Cham: Springer, p. 31-74 44 p. (SEMA SIMAI Springer Series; vol. 15)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Spectral Element Method
Anisotropic Diffusion
Mixed Formulation
Incidence Matrix
Divergence-free
Modeling of turbulent premixed flames using flamelet-generated manifolds
van Oijen, J. A., 2018, Modeling and Simulation of Turbulent Combustion. De, S., Agarwal, A. K., Chaudhuri, S. & Sen, S. (eds.). Dordrecht: Springer, p. 241-265 (Energy, Environment, and Sustainability book series (ENENSU))Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Combustion equipment
Direct numerical simulation
Large eddy simulation
Numerical models
Methane
Modelling framework for electromagnetic noise generation from traction motors
Botling, F., Lopez Arteaga, I. & Leth, S., 1 Jan 2018, Noise and Vibration Mitigation for Rail Transportation Systems. Anderson, D., Gautier, P-E., Lida, M., Nelson, J. T., Tompson, D. J., Tielkes, T., Towers, D. A., de Vos, P. & O Nielsen, J. C. (eds.). Springer, p. 263-278 16 p. (Notes on Numerical Fluid Mechanics and Multidisciplinary Design; vol. 139)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Traction motors
Power converters
Acoustic noise
Physics
Acoustics
Numerical simulations of fluid transport by magnetically actuated artificial cilia
Khaderi, S. N., den Toonder, J. M. J. & Onck, P. R., 1 Sep 2018, Atlas of cilia bioengineering and biocomputing. Mayne, R. & den Toonder, J. (eds.). Gistrup: River Publishers, p. 137-148Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
On the physics underlying longitudinal capillary recruitment
Huyghe, J. M., 1 Jan 2018, Advances in Experimental Medicine and Biology. Cham: Springer, p. 191-200 10 p. (Advances in Experimental Medicine and Biology; vol. 1097)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Physics
Blood
Erythrocytes
Cells
Surface Tension
Optimal sizing of waste heat recovery systems for dynamic engine conditions
Feru, E., Goyal, S. K. & Willems, F. P. T., 5 Nov 2018, Organic Rankine Cycle Technology. Wang, E. (ed.). Intech open access publisher, p. 79-101 24 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Open Access
File
Waste heat utilization
Engines
Fuel consumption
Rankine cycle
Optimal systems
Preface
Salvetti, M. V., Armenio, V., Fröhlich, J., Geurts, B. J. & Kuerten, H., 1 Jan 2018, Direct and Large-Eddy Simulation XI. Salvetti, M. V., Armenio, V., Fröhlich, J., Geurts, B. J. & Kuerten, H. (eds.). Cham: Springer, p. vii-viii 2 p. (ERCOFTAC Series; vol. 25)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Robust real-world emissions by integrated ADF and powertrain control development
Willems, F. P. T., van Gompel, P., Seykens, X. L. J. & Wilkins, S., 2018, Control strategies for advanced driver assistance systems and autonomous driving functions : development, testing and verification. Waschl, H., Kolmanovsky, I. & Willems, F. (eds.). Cham: Springer, p. 29-45 (Lecture Notes in Control and Information Sciences; vol. 476)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Powertrains
Testing
Energy dissipation
Energy utilization
Aging of materials
The implementation of 5-D FGM for LES of a gas turbine model combustor with heat loss
Donini, A., Bastiaans, R. J. M., van Oijen, J. A. & de Goey, L. P. H., 2018, Direct and Large-Eddy Simulation X. Grigoriadis, D. G. E., Geurts, B. J., Kuerten, H., Fröhlich, J. & Armenio, V. (eds.). Dordrecht: Springer, p. 361-366 6 p. (ERCOFTAC Series; vol. 24)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Functionally graded materials
Combustors
Heat losses
Industrial applications
Gas turbines
Time-regularized and periodic event-triggered control for linear systems
Borgers, D. P., Dolk, V. S., Dullerud, G. E., Teel, A. R. & Heemels, W. P. M. H., 1 Jan 2018, Control Subject to Computational and Communication Constraints. Tarbouriech, S., Girard, A. & Hetel, L. (eds.). Springer, p. 121-149 29 p. (Lecture Notes in Control and Information Sciences; vol. 475)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
event
control system
time
guarantee
energy
2017
Adaptive training of neural networks for control of autonomous mobile robots
Steur, E., Vromen, T. & Nijmeijer, H., 2017, Sensing and Control for Autonomous Vehicles - Applications to Land, Water and Air Vehicles. Fossen, T. I., Nijmeijer, H. & Pettersen, K. Y. (eds.). Springer, Vol. 474, p. 387-405 19 p. (Lecture Notes in Control and Information Sciences; vol. 474)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
robot
neural network
hardware
performance
tolerance
Basic quantum‐chemical concepts, the chemical bond revisited
van Santen, R. & Tranca, I., 24 Feb 2017, Modern Heterogeneous Catalysis : An Introduction. van Santen, R. A. (ed.). 2017 ed. Wiley-VCH Verlag, p. 173-207 35 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Chemical bonds
Transition metals
Hamiltonians
Electronic structure
Crystals
Binary-fluid–solid interaction based on the Navier–Stokes–Cahn–Hilliard Equations
van Brummelen, E. H., Shokrpour Roudbari, M., Simsek - Senel, G. & van der Zee, K. G., 2017, Fluid-structure interaction: modeling, adaptive discretizations and solvers. Frei, S., Holm, B., Richter, T., Wick, T. & Yang, H. (eds.). Walter de Gruyter GmbH, p. 283-323 41 p. (Radon Series on Computational and Applied Mathematics; vol. 20)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
fluid-solid interactions
binary fluids
traction
fluids
interfacial tension
Chemical bonding and reactivity of transition metal surfaces
van Santen, R. & Tranca, I., 24 Feb 2017, Modern heterogeneous catalysis: an introduction. van Santen, R. A. (ed.). 2017 ed. Wiley-VCH Verlag, p. 209-288 80 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Quantum chemistry
Chemical bonds
Chemisorption
Transition metals
Chemical activation
Constrained optimal motion planning for autonomous vehicles using PRONTO
Aguiar, A. P., Bayer, F. A., Hauser, J., Häusler, A. J., Notarstefano, G., Pascoal, A. M., Rucco, A. & Saccon, A., 2017, Sensing and Control for Autonomous Vehicles - Applications to Land, Water and Air Vehicles. Springer, p. 207-226 20 p. (Lecture Notes in Control and Information Sciences; vol. 474)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
planning
endurance
energy
time
Convergent systems: nonlinear simplicity
Pavlov, A. & van de Wouw, N., 2017, Nonlinear systems: techniques for dynamical analysis and control. Wouw, van de, N., Lefeber, E. & Lopez Arteaga, I. (eds.). Berlin: Springer, p. 51-77 27 p. (Lecture Notes in Control and Information Sciences; vol. 470)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
time
Emergence of oscillations in networks of time-delay coupled inert systems
Steur, E. & Pogromskiy, S., 2017, Nonlinear systems : techniques for dynamical analysis and control. van de Wouw, N., Lefeber, E. & Lopez Arteaga, I. (eds.). Berlin: Springer, p. 137-154 18 p. (Lecture Notes in Control and Information Sciences; vol. 470)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
time
Experimental validation of robust chatter control for high-speed milling processes
van de Wouw, N., van Dijk, N. J. M., Schiffler, A., Nijmeijer, H. & Abele, E., 2017, Time delay systems: theory, numerics, applications, and experiments. Insperger, T., Ersal, T. & Orosz, G. (eds.). Dordrecht: Springer, p. 315-332 (Time Delay Systems; vol. 7)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Robust control
Controllers
Magnetic bearings
Milling (machining)
Productivity
From cooperative to autonomous vehicles
van der Sande, T. P. J. & Nijmeijer, H., 2017, Sensing and Control for Autonomous Vehicles: Applications to Land, Water and Air Vehicles. Fossen, T. I., Pettersen, K. Y. & Nijmeijer, H. (eds.). Dordrecht: Springer, p. 435-452 (Lecture notes in control and information sciences; vol. 474)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Advanced driver assistance systems
Adaptive cruise control
Automation
Engineers
Model-based engineering of supervisory controllers for cyber-physical systems
Reniers, M. A., van de Mortel - Fronczak, J. M. & Roelofs, K., 2017, Industrial internet of things. Basel: Springer, Vol. Part II, p. 111-136 (Springer Series in Wireless Technology)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Controllers
Interchanges
Cyber Physical System
Visualization
Testing
Model-based testing of cyber-physical systems
Aerts, A., Reniers, M. A. & Mousavi, M., 2017, Cyber-Physical Systems: Foundations, Principles and Applications. Song, H., Rawat, D. B., Jeschke, S. & Brecher, C. (eds.). s.l.: Academic Press Inc., p. 287-304Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Testing
Hybrid systems
Computer systems
Cyber Physical System
Specifications
1
Citation
(Scopus)
Printhead health in industrial inkjet printing, in-line and off-line detection of poor drop formation
Wijshoff, H. M. A., 2017, Handbook of industrial inkjet printing: a full system approach. Zapka, W. (ed.). Chichester: Wiley-VCH Verlag, p. 431-444 14 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Real-time fast structuring of polymers using synchrotron WAXD/SAXS techniques
Portale, G., Troisi, E. M., Peters, G. W. M. & Bras, W., 2017, Polymer crystallization II : from chain microstructure to processing. Auriemma, F., Alfonso, G. C. & De Rosa, C. (eds.). Dordrecht: Springer, p. 127-166 (Advances in Polymer Science; vol. 277)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
synchrotrons
polymers
cooling
flow distribution
products
Skin mechanics
Oomens, C. W. J., van Vijven, M. & Peters, G. W. M., 1 Jan 2017, Biomechanics of Living Organs: Hyperelastic Constitutive Laws for Finite Element Modeling. Payan, Y. & Ohayon, J. (eds.). Amsterdam: Elsevier, p. 347-357 11 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Mechanics
Dermis
Epidermis
Skin
Cornea
2016
A discussion on gradient damage and phase-field models for brittle fracture
De Borst, R. & Verhoosel, C. V., 2016, Advanced Methods of Continuum Mechanics for Materials and Structures. Naumenko, K. & Aßmus, M. (eds.). Singapore: Springer, p. 263-277 15 p. (Advanced Structured Materials; vol. 60)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Brittle fracture
Distribution functions
Mechanics
Drug delivery through microneedles
Luttge, R., 1 Jan 2016, Microsystems for Pharmatechnology : Manipulation of Fluids, Particles, Droplets, and Cells. Dietzel, A. (ed.). Dordrecht: Springer, p. 275-298 24 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Drug delivery
Technology
Pharmaceutical Preparations
Vaccines
Drug products
Elasto-capillarity simulations based on the Navier-Stokes-Cahn-Hilliard equations
Van Brummelen, E. H., Shokrpour-Roudbari, M. & Van Zwieten, G. J., 2016, Advances in Computational Fluid-Structure Interaction and Flow Simulation: New Methods and Challenging Computations. Bazilevs, Y. & Takizawa, K. (eds.). Berlin: Springer, p. 451-462 12 p. (Modeling and Simulation in Science, Engineering and Technology)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Capillarity
Complex Fluids
Cahn-Hilliard Equation
Navier-Stokes Equations
Diffuse Interface
Inkjet printheads
Morita, N., Khalate, A. A., van Buul, A. M. & Wijshoff, H. M. A., 2016, Fundamentals of inkjet printing: the science of inkjet and droplets. Hoath, S. D. (ed.). Wiley-VCH Verlag, p. 57-89Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic
Printers (computer)
Printing
Fusion reactions
Coloring
Roofs
Integration of supervisory control synthesis in model-based systems engineering
Baeten, J. C. M., van de Mortel - Fronczak, J. M. & Rooda, J. E., 2016, Complex systems: relationships between control, communications and computing. Springer, Vol. Part I, p. 39-58 20 p. (Studies in Systems, Decision and Control; vol. 55)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic
Systems engineering
Supervisory personnel
Cost reduction
Control systems
Mechanical modeling of skin
Oomens, C. W. J. & Peters, G. W. M., 1 Jan 2016, Structure-Based Mechanics of Tissues and Organs. Kassab, G. S. & Sacks, M. S. (eds.). New York: Springer, p. 317-327 11 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Skin
Biomechanics
Biomechanical Phenomena
Testing
testing
Mechatronics disrupted
Steinbuch, M., 1 Jan 2016, Mechatronic Futures: Challenges and Solutions for Mechatronic Systems and Their Designers. Hehenberger, P. & Bradley, D. (eds.). Cham: Springer, p. 17-24 8 p.Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Mechatronics
Feedback
Engineers
Cams
Industry
Modeling flow-induced crystallization
Roozemond, P. C., van Drongelen, M. & Peters, G. W. M., 24 Sep 2016, Polymer crystallization II: from chain microstructure to processing. Auriemma, F., Alfonso, G. C. & Rosa, de, C. (eds.). Berlin: Springer, p. 243-294 (Advances in Polymer Science ; vol. 277)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
crystallization
shear
crystals
polypropylene
nonisothermal processes
Morphology development in immiscible polymer blends
Cardinaels, R. M. & Moldenaers, P., Jun 2016, Polymer Morphology: Principles, Characterization, and Processing. Guo, Q. (ed.). Chichester: Wiley, p. 348-373Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
Polymer blends
Processing
Shear flow
Emulsions
Polymers
Non-isothermal crystallization of semi-crystalline polymers : the influence of cooling rate and pressure
van Drongelen, M., Roozemond, P. C. & Peters, G. W. M., 29 Oct 2016, Polymer crystallization II: from chain microstructure to processing. Auriemma, F., Alfonso, G. A. & Rosa, de, C. (eds.). Berlin: Springer, p. 1-36 36 p. (Advances in Polymer Science; vol. 277)Research output: Chapter in Book/Report/Conference proceeding › Chapter › Academic › peer-review
crystallization
polymer
cooling
optical property
mechanical property