Student theses
Search results
-
3D concrete printing: research and development of a structural reinforcement system for 3D printing with concrete
Author: Jutinov, E., 31 Oct 2017Supervisor: Salet, T. (Supervisor 1), Bos, F. (Supervisor 2) & Ahmed, Z. (Supervisor 2)
Student thesis: Master
File -
3MO-TION: 3DCP movement and circulation
Author: Zambotti, A., 30 Apr 2019Supervisor: Kuit, B. (Supervisor 1), van Hoof, S. (Supervisor 2) & Ahmed, Z. (Supervisor 2)
Student thesis: Master
File -
Accelerating early strength and stiffness development of a Portland cement-based mortar for 3D printing
Author: van der Meijde, G., 28 May 2019Supervisor: Wolfs, R. (Supervisor 1), Suiker, A. (Supervisor 2) & Salet, T. (Supervisor 2)
Student thesis: Master
File -
Active adaptive concrete structures
Author: Deetman, A., 31 Oct 2017Supervisor: Salet, T. (Supervisor 1), Habraken, A. (Supervisor 2) & Wolfs, R. (Supervisor 1)
Student thesis: Master
File -
Active adaptive improvement of concrete structures
Author: Ploegmakers, M. N., 24 Nov 2020Supervisor: Habraken, A. P. (Supervisor 1) & Wijte, S. N. (Supervisor 2)
Student thesis: Master
File -
A new face for justice: transformation of an iconic power plant with 3D concrete printing
Author: Abelen, R., 26 Feb 2019Supervisor: Bekkering, J. (Supervisor 1), van Hoof, S. (Supervisor 2), Kuit, B. (Supervisor 2) & Ahmed, Z. (Supervisor 2)
Student thesis: Master
File -
An integrated approach for topology optimization and print path generation of cable-reinforced 3D printed concrete structures
Author: Versteege, J., 27 Oct 2020Supervisor: Salet, T. A. (Supervisor 1), Wolfs, R. J. (Supervisor 2) & Pauwels, P. (Supervisor 2)
Student thesis: Master
-
A numerical simulation of an ESECMaSE shaking table test
Author: Afantrous, H., 31 Aug 2019Supervisor: Wijte, S. (Supervisor 1), Suiker, A. (Supervisor 2), Middelkoop, E. (External person) (External coach) & Vermeltfoort, A. (Supervisor 2)
Student thesis: Master
File -
Arching action in calcium silicate masonry walls subjected to out-of-plane loading
Author: van Wanroij, M., Sep 2018Supervisor: Vermeltfoort, A. (Supervisor 1), Wijte, S. (Supervisor 2) & Martens, D. (Supervisor 2)
Student thesis: Master
File -
Assembling structural 3D concrete printed elements
Author: van den Bulck, L., 19 Dec 2017Supervisor: Salet, T. (Supervisor 1), Habraken, A. (Supervisor 2) & Ahmed, Z. (Supervisor 2)
Student thesis: Master
File -
Behavior of unreinforced concrete-to-concrete interfaces under shear loading
Author: Croes, L., 28 May 2019Supervisor: Wijte, S. (Supervisor 1), Dieteren, G. G. (External person) (External coach) & Vermeltfoort, A. (Supervisor 2)
Student thesis: Master
File -
Bond behavior of CFRP and flexible adhesive in masonry walls: experimental and numerical research
Author: Asahaad, M., 26 Jun 2018Supervisor: Vermeltfoort, A. (Supervisor 1), Türkmen, Ö. (Supervisor 2), Wijte, S. (Supervisor 2) & Bosco, E. (Supervisor 2)
Student thesis: Master
File -
Bridge : architecture of connection: Park Bridge Hotel Centrale
Author: Kulawik, A., 26 Feb 2019Supervisor: Bekkering, J. (Supervisor 1), Kuit, B. (Supervisor 2), van Hoof, S. (Supervisor 2) & Ahmed, Z. (Supervisor 2)
Student thesis: Master
File -
Controlling the concrete temperature in the 3D concrete printing process: developing a real-time temperature control system for 3D concrete printing
Author: Abdelghany, O. (., 31 Aug 2018Supervisor: Mazairac, L. (Supervisor 1) & Salet, T. (Supervisor 1)
Student thesis: Master
File -
Coupled buckling of hollow section braces and chords in optimized welded lattice griders
Author: Poels, A., 31 Jan 2017Supervisor: Snijder, H. (Supervisor 1), Teeuwen, P. (Supervisor 2) & Wijte, S. (Supervisor 2)
Student thesis: Master
File -
Courtyards
Author: Önder, S., 27 Aug 2019Supervisor: van Hoof, S. (Supervisor 1), Kuit, B. (Supervisor 2), Ahmed, Z. (Supervisor 2) & Bekkering, J. (Supervisor 2)
Student thesis: Master
File -
Damping in high-rise : Verification of the energy flow analysis method as identification tool for damping in high-rise buildings
Author: Talib, I., 28 May 2019Supervisor: Suiker, A. (Supervisor 1), Wijte, S. (Supervisor 2), Bronkhorst, A. (External coach) & Pruiksma, J. (External coach)
Student thesis: Master
File -
Death and life in architecture
Author: Biffi, A., 26 Feb 2019Supervisor: Kuit, B. (Supervisor 1), van Hoof, S. (Supervisor 2), Bekkering, J. (Supervisor 2) & Ahmed, Z. (Supervisor 2)
Student thesis: Master
File -
De Centrale Ghent
Author: Colen, S., 30 Apr 2019Supervisor: Kuit, B. (Supervisor 1), Bekkering, J. (Supervisor 2), van Hoof, S. (Supervisor 2) & Ahmed, Z. (Supervisor 2)
Student thesis: Master
File -
De 'centrale' library Ghent: transformation of a former industrial building
Author: Şahin, C., 26 Feb 2019Supervisor: Bekkering, J. (Supervisor 1), van Hoof, S. (Supervisor 1), Kuit, B. (Supervisor 2) & Ahmed, Z. (Supervisor 2)
Student thesis: Master
File -
De Centrale Market Hall: the market hall as a mediator for the visitors of Ghent
Author: Galeli, R., 30 Apr 2019Supervisor: Bekkering, J. (Supervisor 1), van Hoof, S. (Supervisor 2), Kuit, B. (Supervisor 2) & Ahmed, Z. (Supervisor 2)
Student thesis: Master
File -
Deformation limits to be used to evaluate deformation measurements of concrete bridges
Author: Mensink, J., 31 Aug 2017Supervisor: Wijte, S. (Supervisor 1), Salet, T. (Supervisor 2) & Peelen, W. (External person) (External coach)
Student thesis: Master
File -
De invloed van aardbevingen op bevestigingen van woningbouwdaken
Author: Schell, R., Oct 2018Supervisor: Jorissen, A. (Supervisor 1), Wijte, S. (Supervisor 2) & de Groot, W. (External coach)
Student thesis: Master
File -
Design & stability slender concrete columns: determination of the nominal stiffness including physical and geometrical nonlinearity in the finite element analysis
Author: Kuzin, P., 24 Sep 2019Supervisor: Wijte, S. (Supervisor 1), Hofmeyer, H. (Supervisor 2) & Wolfs, R. (Supervisor 2)
Student thesis: Master
File -
Designing with recovered precast concrete elements: a study on the possibilities of reusing structural precast concrete elements, from disassembled office buildings, in new apartment buildings
Author: van den Brink, G., 15 Dec 2020Supervisor: Teuffel, P. M. (Supervisor 1), Wijte, S. N. (Supervisor 2) & Blok, R. (Supervisor 2)
Student thesis: Master
File -
Design of 3D-printed quadrilateral walls by applying the Stringer-panel method to reduce concrete use
Author: Simpelaar, C., 28 Apr 2020Supervisor: Salet, T. A. (Supervisor 1), Wolfs, R. J. (Supervisor 2) & Habraken, A. P. (Supervisor 2)
Student thesis: Master
File -
Design of a data center under induced and tectonic earthquake loading using seismic mitigation methods
Author: Spits, G., 31 Aug 2018Supervisor: Snijder, H. (Supervisor 1), Wijte, S. (Supervisor 2) & Teeuwen, P. (External coach)
Student thesis: Master
File -
Design of a datacentre with high floor loads under different seismic loads
Author: van de Mortel, F., Oct 2018Supervisor: Snijder, B. (Supervisor 1), Wijte, S. (Supervisor 2) & Teeuwen, P. (External coach)
Student thesis: Master
File -
Dynamic behaviour of timber-concrete floors caused by walking loads: a study into the influence of the transverse stiffness of a timber-concrete composite floor on the dynamic behaviour and vibration comfort
Author: Klaassen, J., 29 Mar 2019Supervisor: Jorissen, A. (Supervisor 1), Wijte, S. (Supervisor 2) & Koopman, A. (Supervisor 2)
Student thesis: Master
File -
Edge strength of core drilled and waterjet cut holes in structural glass panels
Author: Sanders, K., 27 Aug 2019Supervisor: Belis, J. (Supervisor 1), Bos, F. (Supervisor 2) & ten Brincke, E. (External coach)
Student thesis: Master
File -
Effects of imperfections on axially loaded members and experimental verification on 3D printed polypropylene
Author: Bos, D., 24 Sep 2019Supervisor: Suiker, A. (Supervisor 1), Hofmeyer, H. (Supervisor 2) & Wolfs, R. (Supervisor 2)
Student thesis: Master
File -
Element optimization by functional grading of fiber reinforced 3D printed concrete beams: steel fiber location in slender to very deep beams
Author: Dam, T., 26 Mar 2019Supervisor: Salet, T. (Supervisor 1), Bos, F. (Supervisor 2) & Ahmed, Z. (Supervisor 2)
Student thesis: Master
File -
Experimenteel onderzoek naar het effect van flenzen op het mechanische gedrag van ongewapende kalkzandsteen stabiliteitswanden.
Author: Snel, M., 25 Jun 2019Supervisor: Wijte, S. (Supervisor 1), Vermeltfoort, A. (Supervisor 2) & Lamers, H. (External person) (External coach)
Student thesis: Master
File -
Extended yieldline theory: implementation of compressive membrane action in arbitrary shaped floor slabs
Author: Winters, R., 30 Jun 2017Supervisor: Salet, T. (Supervisor 1), Beetz, J. (Supervisor 2) & Bos, F. (Supervisor 2)
Student thesis: Master
File -
Food building bridge
Author: Yuen, K., 30 Apr 2019Supervisor: Kuit, B. (Supervisor 1), van Hoof, S. (Supervisor 2) & Ahmed, Z. (Supervisor 2)
Student thesis: Master
File -
Ghent community center: funicular form finding for design and 3D concrete printing
Author: Scherptong, J., 24 Sep 2019Supervisor: Bekkering, J. (Supervisor 1), van Hoof, S. (Supervisor 2), Kuit, B. (Supervisor 2) & Ahmed, Z. (Supervisor 2)
Student thesis: Master
File -
Ghent tastes future
Author: Rijvers, J., 26 Jan 2021Supervisor: Bekkering, J. D. (Supervisor 1), Kuit, B. C. (Supervisor 2), van Hoof, J. (. (Supervisor 2) & Ahmed, Z. Y. (Supervisor 2)
Student thesis: Master
File -
Het verwerken van kopersopties van de binnendeuren voor OPTIO-woningen in BIM
Author: Tax, M., 30 Jan 2018Supervisor: Vastert, E. (Supervisor 1), Pronk, A. (Supervisor 1), van Druten, M. C. (External person) (External coach) & Verstegen, H. (External person) (External coach)
Student thesis: Master
File -
Implementation of fibre reinforcement in between the layers of 3D concrete printing
Author: van Brunschot, M., 28 May 2019Supervisor: Salet, T. (Supervisor 1), Bos, F. (Supervisor 2) & Ahmed, Z. (Supervisor 2)
Student thesis: Master
File -
Influence of sustainable cement alternatives on the design and construction of concrete structures
Author: Morren, M., 24 Sep 2019Supervisor: Wijte, S. (Supervisor 1), Lucas, S. (Supervisor 2) & Minartz, P. (External person) (External coach)
Student thesis: Master
File -
Influence of the interface between layers on the tensile properties of 3D printed concrete
Author: Slager, G., 30 Jun 2017Supervisor: Salet, T. (Supervisor 1), Suiker, A. (Supervisor 2) & Wolfs, R. (Supervisor 2)
Student thesis: Master
File -
Investigation into properties of fibre reinforced concrete in extrusion based adaptive manufacturing
Author: Raedts, W., 19 Dec 2017Supervisor: Salet, T. (Supervisor 1), Bos, F. (Supervisor 2) & Ahmed, Z. (Supervisor 2)
Student thesis: Master
File -
Large scale testing of a structural application of 3D printed concrete in the facade of a house
Author: van de Ven, M., 28 Jan 2020Supervisor: Salet, T. A. (Supervisor 1), Wijte, S. N. (Supervisor 2) & Lamers, H. M. (Supervisor 2)
Student thesis: Master
File -
Material and structural design aspects of a prefabricated balcony of lightweight concrete
Author: van Heuveln, E., 31 Aug 2017Supervisor: Wijte, S. (Supervisor 1), Brouwers, H. (Supervisor 2), Bos, F. (Supervisor 2) & Yu, Q. (Supervisor 2)
Student thesis: Master
File -
Measuring and optimizing the 3D concrete printing process, using real time feedback
Author: van Strien, E., 28 Mar 2017Supervisor: Beetz, J. (Supervisor 1) & Wolfs, R. (Supervisor 2)
Student thesis: Master
File -
Modelling the Out-of-plane Behaviour of Seismically Loaded Unreinforced Masonry Cavity Walls: Utilization of Shaking Table Test Data
Author: Pennings, J., 26 Nov 2019Supervisor: Suiker, A. S. (Supervisor 1), Wijte, S. N. (Supervisor 2) & Bronkhorst, A. J. (External coach)
Student thesis: Master
File -
Numerical and experimental assessment of 3D concrete printed sandwich panels with different insulating core materials
Author: Vermue, F., 19 Dec 2017Supervisor: Salet, T. (Supervisor 1), Bos, F. (Supervisor 2) & Lamers, H. (Supervisor 2)
Student thesis: Master
File -
Optimization of 3D concrete printed arch structures: creating a parametric model for shape- and cross-section optimization of arch structures for multiple load combinations considering the requirements of the 3D concrete printing technique
Author: van Vooren, T., 24 Apr 2018Supervisor: Salet, T. (Supervisor 1), Habraken, A. (Supervisor 2) & Ahmed, Z. (Supervisor 2)
Student thesis: Master
File -
Optimization of 3D concrete printed cycling bridges: a ground structure approach
Author: Nefs, K., 27 Aug 2019Supervisor: Salet, T. (Supervisor 1), Habraken, A. (Supervisor 2) & Hofmeyer, H. (Supervisor 2)
Student thesis: Master
File -
Organized chaos
Author: Martens, M., 26 Feb 2019Supervisor: Bekkering, J. (Supervisor 1), Kuit, B. (Supervisor 2), van Hoof, S. (Supervisor 2) & Ahmed, Z. (Supervisor 2)
Student thesis: Master
File